Research on Processing of Drilling Fluid
نویسندگان
چکیده
Currently, the drilling fluid processing and recycling has gained more attention from various oilfields. Whether the waste drilling fluid’s processing and recycling is good or not will directly affect the development of oil industry. Therefore, the urgent affair is to develop and research the processing method of waste drilling fluid.This article describes various processing methods of waste drilling fluid which are being adopted by oilfields, such as Microbial Treatment, Curing Agent and Curing Technology, Decentralized Processing Method, Mechanical Dehydration Method, Demulsification Method, Salt Cave Method, Reinjection Method, Waste Drilling Fluid Treatment at Sea, Backfill Method.This article has also compared the advantages and disadvantages of these methods, summed up the trend of the development of drilling fluid processing method.
منابع مشابه
Investigating the Effect of Polythin and Polydrill on the Properties of Drilling Fluids
In this study, synthetic sulfonated polymers were used in order to enhance the rheological properties of drilling fluids. The capability of these polymers in reducing the effects of environmentally friendly, but harmful, pollutants such as cement, calcium chloride, gypsum as well as pH changes were investigated. In the present work, two sulfonated synthetic polymers, namely Polythin and Polydri...
متن کاملSynthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid
Maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. If viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. In this study, synthesis of Alumina/Polyacrylamide nanocomposite through solution polymerization method was performed. Rheological behavior of m...
متن کاملStudy on Rheological Property Control Method of “Three High” Water Based Drilling Fluid
The rheological regulation of the “three high” (high temperature, high density and high salinity) water-based drilling fluid is a worldwide problem due to the combined influence of temperature, solid content and salinity. This paper investigates the factors and regulation methods about rheological property of “three high” water based drilling fluid, and the effects of clay, salinity and weighti...
متن کاملEffect of Carbonate Additives on Dynamic Filtration Index of Drilling Mud
Filtration index of the drilling fluid is an important parameter of well drilling, especially at drilling-in the reservoirs. Standard parameter in the study of drilling fluids is static filtration index. At the same time, it is more feasible to determine dynamic filtration index, if considering actual conditions of the well. Use of polymer carbonate-weighted drilling fluids is advisable at dril...
متن کاملSynthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid
Maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. If viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. In this study, synthesis of Alumina/Polyacrylamide nanocomposite through solution polymerization method was performed. Rheological behavior of m...
متن کامل