Design and Implementation of Internal Multi-band Folded Monopole Antenna for Mobile Station
نویسندگان
چکیده
In this paper, we designed and implemented an internal multi-band folded monopole antenna for mobile handset. The proposed antenna covers Global System for Mobile Communications (GSM900: 880~960 MHz), Digital Communications System (DCS: 1710~1880 MHz), USPersonal Communications Service (US-PCS: 1850~1990 MHz), Bluetooth(2400~2484 MHz), WiMAX(3400~3600 MHz), and Wireless Local Area Network (WLAN: 5150~5350 MHz, 5725~5875 MHz) band for Voltage Standing Wave Ratio (VSWR) ≤ 3. The measured peak gains of the implemented antenna are -1.78dBi at 920MHz, 2.72dBi at 1795MHz, 2.25dBi at 1920MHz, 2.34dBi at 2442MHz, 2.11 dBi at 3550MHz, and 2.04 dBi at 5250MHz.
منابع مشابه
Novel Wi-Fi Antenna Design and Measurement
A high performance monopole antenna fabricated using a folded wire line and metal patch as radiator is presented. A prototype of the proposed monopole antenna with a compact area size is implemented, and the multi-band WLAN antenna shows a wide operating bandwidth of about 530MHz and 3400MHz for low band and high band, bandwidth, making it easy to cover the IEEE 802.11a, IEEE 802.11b, IEEE 802....
متن کاملMultiband Slot Loaded Uniplanar CPW-fed Monopole Antenna with Asymmetrical Arms
This paper presents a new approach for the design of a multiband uniplanar CPW-fed monopole antenna. The antenna consists of a fork like monopole strip to which is added an inverted U-shaped strip. The three branch fork like strip can create three resonant bands within the WLAN range while the placement of the inverted U-shaped strip provides a better impedance matching for the lowest resonant ...
متن کاملA Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications
This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...
متن کاملDesign and Fabrication of Plasma Array Antenna with Beam Forming
In this paper, the design and implementation of plasma antenna array with beam forming is discussed. The structure consists of a circular array of plasma tube enclosed in a unipolar UHF band monopole antenna. Beam forming is possible by stimulated plasma tubes. The combination of the above antenna with plasma excitation controller makes a beam forming smart antenna. An experimental model in UHF...
متن کاملDesign, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Inform. and Commun. Convergence Engineering
دوره 9 شماره
صفحات -
تاریخ انتشار 2011