Optimal Synthesis of a Four-Bar Linkage by Method of Controlled Deviation
نویسندگان
چکیده
This paper considers optimal synthesis of a four-bar linkage by method of controlled deviations. The advantage of this approximate method is that it allows control of motion of the coupler in the four-bar linkage so that the path of the coupler is in the prescribed environment around the given path on the segment observed. The Hooke-Jeeves’s optimisation algorithm has been used in the optimisation process. Calculation expressions are not used as the method of direct searching, i.e. individual comparison of the calculated value of the objective function is made in each iteration and the moving is done in the direction of decreasing the value of the objective function. This algorithm does not depend on the initial selection of the projected variables. All this is illustrated on an example of synthesis of a four-bar linkage whose coupler point traces a straight line, i.e. passes through sixteen prescribed points lying on one straight line.
منابع مشابه
Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...
متن کاملNeuro-Optimizer: A New Artificial Intelligent Optimization Tool and Its Application for Robot Optimal Controller Design
The main objective of this paper is to introduce a new intelligent optimization technique that uses a predictioncorrectionstrategy supported by a recurrent neural network for finding a near optimal solution of a givenobjective function. Recently there have been attempts for using artificial neural networks (ANNs) in optimizationproblems and some types of ANNs such as Hopfield network and Boltzm...
متن کاملUsing the Matrix Method to Compute the Degrees of Freedom of Mechanisms
In this paper, some definitions and traditional formulas for calculating the mobility of mechanisms are represented, e.g. Grubler formula, Somov - Malyshev formula, and Buchsbaum - Freudenstei. It is discussed that there are certain cases in which they are too ambiguous and incorrect to use. However, a matrix method is suggested based on the rank of the Jacobian of the mechanism and its applica...
متن کاملOptimal Four-Bar Linkage for the Stability and the Motion of the Human Knee Prostheses
The optimal design of human lower limb prostheses, in particular of knee devices, is fundamental in order to restore the lost functionality and aesthetic aspect of the amputee’s locomotion. Among all knee devices, the four-bar linkage is still the most widespread mechanism, since, despite its simplicity, it allows the prosthesis to be sufficiently stable and, at the same time, to replicate the ...
متن کاملNonlinear dynamic analysis of a four-bar mechanism having revolute joint with clearance
In general, joints are assumed without clearance in the dynamic analysis of multi-body echanical systems. When joint clearance is considered, the mechanism obtains two uncontrollable degrees of freedom and hence the dynamic response considerably changes. The joints’ clearances are the main sources of vibrations and noise due to the impact of the coupling parts in the joints. Therefore, the syst...
متن کامل