Is plane strain a valid assumption in non-cylindrical fault-cored folds?
نویسندگان
چکیده
Many algorithms assume plane strain to construct, model and restore fault-cored folds. Using mechanical models that allow heterogeneous transport in three dimensions, we explore the distribution and magnitude of out-of-plane transport in plunging fault-cored anticlines and provide guidelines of where plane strain should and should not be applied. We developed a new technique of incrementing infinitesimal elastic strains to produce folds with aspect ratios similar to natural folds. Map views of displacement vectors show that in general, out-of-plane displacement is localized near the lateral fold tips. Cross-sections show that out-of-plane transport is depth dependent with out-of-plane displacement increasing toward the surface. Flexural slip surfaces compartmentalize out-of-plane transport within distinct mechanical units, with the maximum outof-plane displacement near the tops of mechanical units. Two-dimensional models with additional frictionally slipping bed contacts suggest that freely slipping contacts can approximate the deformation of many frictionally slipping contacts. We show that out-of-plane transport is significant in the simplest non-cylindrical folds, and suggest that complex non-cylindrical structures should not be modeled using plane strain exclusively. We also show that flexural slip surfaces exert a significant control on the magnitude and structural position of out-of-plane transport in our models. ! 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds
The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simu...
متن کاملStructural analyses of fault planes using fault slickenlines and calcite e-twins data from the Dasht-e-Arjan graben, SW Iran
Dasht-e-Arjan is a northeast trending graben located 65 km west of Shiraz. It was formed along active segments of the Korrehbas fault, perpendicularly to the Shahnesh in and Salamati anticlines. Oriented sampling from bordering fault planes and striations was carried out to evaluate the relative amounts of paleostress/strain needed to form the graben. Measurements of e-twins and c-axis of calci...
متن کاملNumerical and Experimental Research of Deep Drawing Process
There are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more econom...
متن کاملStress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses
To maintain the structural integrity of the engineering components, having an exact knowledge of residual stresses is important. Among all mechanical strain relief techniques to measure residual stresses, slitting is one of the youngest. This technique relies on the introduction of a narrow slot of increasing depth in a part containing residual stresses. Similar to other measurement techniques,...
متن کاملFree vibration Study of simply supported cylindrical laminateds panels with piezoelectric layer
In the present study, vibration of cylindrical laminates with different layers and angles were studied. In order to actuate and polarize in radial direction, a piezoelectric layer was located at outer surface of composite shell. Laminates were assumed long enough so that plane strain state analysis in 2D can be used properly. In order to satisfy the boundary conditions, variables in terms of Fo...
متن کامل