Modeling the effects of binary mixtures on survival in time.

نویسندگان

  • Jan Baas
  • Bart P P Van Houte
  • Cornelis A M Van Gestel
  • Sebastiaan A L M Kooijman
چکیده

In general, effects of mixtures are difficult to describe, and most of the models in use are descriptive in nature and lack a strong mechanistic basis. The aim of this experiment was to develop a process-based model for the interpretation of mixture toxicity measurements, with effects of binary mixtures on survival as a starting point. The survival of Folsomia candida was monitored daily for 21 d during the exposure to six binary mixtures of cadmium, copper, lead, and zinc in a loamy sand soil. The measurements were used to develop a model to describe survival in time. The model consists of two parts: A one-compartment model that describes uptake and elimination of the compounds, and a hazard model describing survival. The model was very successful in describing the data and at finding possible interactions. The mixture of copper and lead showed a slight antagonistic effect, the other mixtures showed no interaction. The model is straightforward in its biological assumptions and does not require a mode-of-action a priori choice of the mixture that might influence the modeled interaction of the components in the mixture. The model requires measurements at intermediate time points, but runs with relatively few parameters and is robust in finding interactions. When mixture effects are considered at only one time point, care should be taken with the assignment of interactions because these may be different for different points during the time course of the experiments.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of Pressure Drop in the 2D Spouted Bed with Conical Base of Binary Particle Mixtures: Effects of Particle Size and Density

In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...

متن کامل

Prediction of true critical temperature and pressure of binary hydrocarbon mixtures: A Comparison between the artificial neural networks and the support vector machine

Two main objectives have been considered in this paper: providing a good model to predict the critical temperature and pressure of binary hydrocarbon mixtures, and comparing the efficiency of the artificial neural network algorithms and the support vector regression as two commonly used soft computing methods. In order to have a fair comparison and to achieve the highest efficiency, a comprehen...

متن کامل

Study of structural effects of binary mixtures of Nitrobenzene and 2-Alcohols

Densities, structural effects and viscosities of binary nonelectrolyte systems including nitrobenzene + 2-propanol, 2-butanol and 2-pentanol at temperatures (293.15 to 323.15) K and normal atmospheric pressure were measured using an Anton-Paar SVM 3000 stabinger viscometer. Excess molar volumes  and viscosity deviations Δη were calculated and correlated by the Redlich-Kister equation t...

متن کامل

Study of structural effects of binary mixtures of Nitrobenzene and 2-Alcohols

Densities, structural effects and viscosities of binary nonelectrolyte systems including nitrobenzene + 2-propanol, 2-butanol and 2-pentanol at temperatures (293.15 to 323.15) K and normal atmospheric pressure were measured using an Anton-Paar SVM 3000 stabinger viscometer. Excess molar volumes  and viscosity deviations Δη were calculated and correlated by the Redlich-Kister equation to estimat...

متن کامل

Semi Empirical Calculation of Intermolecular Potentials and Transport Properties of Some Binary and Ternary Industrial Refrigerant Mixtures

In this study the intermolecular potential energies of some environment-friendly industrial HFC refrigerants were obtained through the inversion method which is based on the corresponding states principle. These potentials were later employed in calculation of transport properties (viscosity, diffusion, thermal conductivity and thermal diffusion factor) of some binary and ternary refrigerant mi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Environmental toxicology and chemistry

دوره 26 6  شماره 

صفحات  -

تاریخ انتشار 2007