Temperature Dependent Analysis of Mixed Carbon Nanotube Bundle as Vlsi Interconnects
نویسندگان
چکیده
منابع مشابه
Taguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder
In this study, it was attempted to design a high-performance single-walled carbon nanotube (SWCNT) bundle interconnects in a full adder. For this purpose, the circuit performance was investigated using simulation in HSPICE software and considering the technology of 32-nm. Next, the effects of geometric parameters including the diameter of a nanotube, distance between nanotubes in a bundle, and ...
متن کاملInterconnect Challenges and Carbon Nanotube as Interconnect in Nano VLSI Circuits
This chapter discusses about the behavior of Carbon Nanotube (CNT) different structures which can be used as interconnect in Very Large Scale (VLSI) circuits in nanoscale regime. Also interconnect challenges in VLSI circuits which lead to use CNT as interconnect instead of Cu, is reviewed. CNTs are classified into three main types including Single-walled Carbon Nanotube (SWCNT), CNT Bundle, and...
متن کاملAnalysis of Single Wall Carbon Nanotube Interconnects &Comparison with Copper Interconnects at Different Technology Nodes
This paper investigates the performance of the bundle of Single wall Carbon Nanotubes (SWCNT) for low-power and high-speed interconnects for future VLSI applications. The power dissipation and delay of SWCNT bundle interconnects are examined and compared with that of the Cu interconnects at the different technology (16nm, 22nm, 32nm & 45nm) nodes for both intermediate and global interconnects. ...
متن کاملBode Stability Analysis for Single Wall Carbon Nanotube Interconnects Used in 3D-VLSI Circuits
Bode stability analysis based on transmission line modeling (TLM) for single wall carbon nanotube (SWCNT) interconnects used in 3D-VLSI circuits is investigated for the first time. In this analysis, the dependence of the degree of relative stability for SWCNT interconnects on the geometry of each tube has been acquired. It is shown that, increasing the length and diameter of each tube, SWCNT in...
متن کاملStability analysis in multiwall carbon nanotube bundle interconnects
Based on the transmission line model (TLM), we present an exact and general transfer function formula, useful for both single multiwall carbon nanotube (MWCNT) and MWCNT bundle interconnects. Using the standard parameters for 22-nm technology node we perform the Nyquist stability analysis, to investigate the dependence of the degree of relative stability for both single and bundle interconnects...
متن کامل