Optimal Temperature Tracking for Accelerated Cooling Processes in Hot Rolling of Steel

نویسندگان

  • SAROJ K. BISWAS
  • A. SATYANARAYANA
چکیده

This paper is concerned with the development of a control system for tracking of a desired temperaturetime profile for accelerated cooling processes in hot rolling of steel. Control of temperature during cooling is essential for achieving desired mechanical and metallurgical properties of steel. The cooling process is represented by the heat equation in Lagrangian coordinates which is approximated by a set of ordinary differential equations. The control variable is the velocity of coolant water flow. Motivated by the fact that in many steel industries water flow is adjusted to some fixed velocity based on experience and heuristics, we assume that the control variable, water jet velocity, be a constant time invariant parameter. Gamkrelidze minimum principle is used to determine the optimal jet velocity for the desired temperature tracking. The results are illustrated by simulation examples.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Header Geometry on Temperature Distribution in Cold Rolling

The objectives in the cold rolling process include improved sheet surface quality, enhanced steel mechanical strength, and better solidification operations. Given the increasing demand for higher steel...

متن کامل

Effect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling

Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...

متن کامل

Effects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel

 In this work, effects of homogenization time of 3 to 13 h at 1200 °C on the grain refinement of as-cast AISI 301 stainless steel after different hot rolling conditions were investigated. The results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °C for 9 h followed by hot rolling at temperature range of 1000–1200 °C with strain of 0.8 and stra...

متن کامل

Significance of Heat Conduction Parameter along the Rolling Direction in the Thermal Modeling of the Hot Rolling Process

Obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. Using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at Mobarakeh Steel Company. The effects of different parameters including the heat resu...

متن کامل

Simulation of Temperature Distribution in Hot Strip over Transfer Table

Transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. High temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. Using thermal shields on the transfer table is cons...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1997