Effect of temperature on handgrip holding time.

نویسندگان

  • T J Barter
  • P C Freer
چکیده

The effect of intramuscular temperature upon the holding time of 70% MVC handgrip contraction was studied in 12 college-age men. The intramuscular temperature was regulated by 30 minutes immersion of the forearm and hand in a waterbath at 18 degrees C, 35 degrees C, or 45 degrees C. Elevating intramuscular temperature significantly reduced the holding time duration, (25.7 +/- 6.2 vis 38.3 +/- 8.1, P less than 0.01), while reducing the temperature had no significant effect (37.5 +/- 9.4 vis 38.3 +/- 8.1, N.S.).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

THE EFFECT OF HOLDING TIME ON TEMPERATURE EUTECTIC UNDERCOOLING IN DUCTLIE IRON

In the present research influences of different combinations of five types of inoculants and four types of nodularizers on eutectic nucleation in ductile cast iron were studied. The alloys were kept at 1320°C for 0, 5, 10, 15 and 20 min under nitrogen atmosphere. Cooling curves and image analysis were used to characterize the influence of holding time and different combinations of inoculants an...

متن کامل

Effect of Dyspnea Induced by Breath-holding on Maximal Muscular Strength of Patients with COPD

[Purpose] The purpose of the present study was to clarify the effect of dyspnea induced by breath-holding on maximum muscular strength of patients with COPD. [Subjects] This study recruited 14 COPD subjects via public posting. [Methods] Dyspnea was assessed by the modified Borg scale. The subject asked to stop breathing at end-expiration and to hold their breath with a nose clip for as long as ...

متن کامل

Investigation on effect of holding time in brazing of steel to cemented carbide using Cu-Ag alloy filler metal

Nowadays, cemented carbides-steels joints by brazing method are taken into consideration. One of the problems of these joints is the creation residual stresses that can reduce it with choose correct parameters of brazing. In this study, Silver base alloy filler containing copper, zinc and cadmium have been used in temperature 780°C and the effect of time parameter 5, 10 and 15 minutes on micros...

متن کامل

Investigation on effect of holding time in brazing of steel to cemented carbide using Cu-Ag alloy filler metal

Nowadays, cemented carbides-steels joints by brazing method are taken into consideration. One of the problems of these joints is the creation residual stresses that can reduce it with choose correct parameters of brazing. In this study, Silver base alloy filler containing copper, zinc and cadmium have been used in temperature 780°C and the effect of time parameter 5, 10 and 15 minutes on micros...

متن کامل

Effect of Heat Treatment Process on the Fatigue Behavior of AISI 1060 Steel

This experimental study investigated the effects of quenching and tempering heat treatment on fatigue behavior and also tempering temperature and time holding of AISI 1060 steel. At first, the specimens were austenitized at 800˚C for 1 hour, and then were quenched in the water bath of 25˚C temperature. After that, tempering process was done at the temperature of 250˚C, 450˚C and 650˚C for 1 and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • British journal of sports medicine

دوره 18 2  شماره 

صفحات  -

تاریخ انتشار 1984