Design of Saddle Support for Horizontal Pressure Vessel
نویسندگان
چکیده
This paper presents the design analysis of saddle support of a horizontal pressure vessel. Since saddle have the vital role to support the pressure vessel and to maintain its stability, it should be designed in such a way that it can afford the vessel load and internal pressure of the vessel due to liquid contained in the vessel. A model of horizontal pressure vessel and saddle support is created in ANSYS. Stresses are calculated using mathematical approach and ANSYS software. The analysis reveals the zone of high localized stress at the junction part of the pressure vessel and saddle support due to operating conditions. The results obtained by both the methods are compared with allowable stress value for safe designing. Keywords—ANSYS, Pressure Vessel, Saddle, Support.
منابع مشابه
Design and Analysis of Pressure Vessel Subjected to Pressure-temperature Variation (TECHNICAL NOTE)
Pressure vessel is a container used to store fluids under pressure and temperature. The fluids can be air, water, chemicals, fuel, gases etc. are most commonly used in food and chemical industries, oil refineries and so on. Pressure vessel is subjected to thermal and structural loads for power plant applications. Since the pressure vessel are subjected to both structural and thermal loads stres...
متن کاملThree-Dimensional Finite Element Analysis of Stress Intensity Factors in a Spherical Pressure Vessel with Functionally Graded Coating
This research pertains to the three-dimensional (3D) finite element analysis (FEA) of the stress intensity factors (SIFs) along the crack front in a spherical pressure vessel coated with functionally graded material (FGM). The vessel is subjected to internal pressure and thermal gradient. The exponential function is adopted for property of FGMs. SIFs are obtained for a wide variety of crack sha...
متن کاملتحلیل عددی اثرات توزیع فشار هیدرودینامیکی بر روی شناور تندرو کامپوزیتی و بهینهسازی سازه شناور
In this research, hydrodynamic distribution pressure in continuous times is done and stress and displacement of a high speed vessel are studied. Hydrodynamic distribution pressure is studied for different dead rise angle according to vertical and horizontal vessel velocity at dry chine and wet time steps and is applied to vessel at continues times of vessel variable position. Vessel body is div...
متن کاملConstrained Multi-Objective Optimization Problems in Mechanical Engineering Design Using Bees Algorithm
Many real-world search and optimization problems involve inequality and/or equality constraints and are thus posed as constrained optimization problems. In trying to solve constrained optimization problems using classical optimization methods, this paper presents a Multi-Objective Bees Algorithm (MOBA) for solving the multi-objective optimal of mechanical engineering problems design. In the pre...
متن کاملMean Velocity and Static Pressure in a Sharp-edge Circular Nozzle Jet
An axisymmetric jet issued from a sharp edged circular convergent nozzle has been studied experimentally in the near field at Reynolds number 5.3x104 to search the saddle shape behavior of mean velocity and the role of mean static pressure in the jet flow. Due to the vena contracta effect the centerline mean velocity of the jet increases about 4.2% of its exit value and corresponding decrease ...
متن کامل