A Compact Radio-Frequency Power Supply for Ion and Particle Guides and Traps

نویسنده

  • Ivo Cermak
چکیده

In this paper, we present a novel compact rf or ac power generator that uses a resonant driving scheme without the necessity for any matching device. The developed unit also doesn't need any expensive high voltage power supply for generating output voltages in the range of some hundred volts typically required for the function of trapping devices. The high efficiency of the generator allows operation at output powers of around 50 W without any performance losses. The frequency range of the device is determined by the output transformer. It can be easily varied from the megahertz range down to some kilohertz just by replacing the output transformer and several capacitors in the control part of the generator. Thus, our device can be used for supplying traps operating with ions as well as with charged nanoor microparticles. PACS numbers: 84.30.Ng, 82.80.Ms, 29.30.Aj, 07.75.+h, 07.81.+a

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simple radio-frequency power source for ion guides and ion traps

A high power oscillator circuit, designed to power radio-frequency ~rf! ion guides and traps, is described. The rf circuit is directly coupled to the guide/trap electrodes, and no frequency or impedance matching is required. The design provides precisely adjustable rf amplitudes from ;50 to 600 V, either under manual or computer control. The operating frequency can be varied from ,1 to ;30 MHz ...

متن کامل

A spectral method for halo particle definition in intense mismatched beams

Related Articles Status of the SPIRAL I upgrade at GANIL Rev. Sci. Instrum. 83, 02A911 (2012) Production of a highly charged uranium ion beam with RIKEN superconducting electron cyclotron resonance ion source Rev. Sci. Instrum. 83, 02A333 (2012) High resolution extreme ultraviolet spectrometer for an electron beam ion trap Rev. Sci. Instrum. 82, 083103 (2011) Low power high-performance radio fr...

متن کامل

A High Efficient, Compact 4th Order CLCL Converter Features to Use Constant-Current Power Supply

This paper presents a 4th order CLCL resonant converter which is suitable for constant current power supply applications. This converter is designed with Immittance characteristic with two inductors and two capacitors in resonant network. A detailed analysis and design process of a 200w converter as a constant current supply have been provided and simulation results are verified with results of...

متن کامل

Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)

In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...

متن کامل

Consequences of three-dimensional physical and electromagnetic structures on dust particle trapping in high plasma density material processing discharges

Plasma processing discharges are typically designed with the goal of having uniform reactant fluxes to the substrate and a minimum of dust particle contamination of the wafer. It is not uncommon, however, that reactors have three-dimensional ~3D! structures such as antennas ~or coils!, gas injection nozzles, subor super-wafer topography and single-sided pump ports. These structures can contribu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004