Publication I Lehto , J . H . 2003 . Mechanical fibers as reinforcement pulp . 2003
نویسنده
چکیده
منابع مشابه
Publication II Lehto , J . H . 2004 . Characterisation
Basic fiber properties can be classified into four categories: Size distribution, shape, structure of the cell wall and the fiber surface. This approach was used when long fiber fractions separated from 10 different mechanical pulps and unrefined and refined chemical pulp samples were compared in order to shed light on the different reinforcing abilities of chemical and mechanical pulp fibers. ...
متن کاملReinforcement ability of mechanical pulp fibres
Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Jouko Lehto Name of the doctoral dissertation Reinforcement ability of mechanical pulp fibres Publisher School of Chemical Technology Unit Department of Forest Products Technology Series Aalto University publication series DOCTORAL DISSERTATIONS 47/2011 Field of research Paper and Printing Research Manuscript submitted 2 Novem...
متن کاملMechanical Properties of Irregular Fiber (Invited Review Paper)
Irregularities are inherent to virtually all fibers, including the conventional textile fibers, the high-performance brittle fibers and newly developed nano-fibers. These irregularities can fall into two main categories: dimensional or geometrical irregularity (external) and structural irregularity (internal). For natural fibers such as wool, diameter variation along fiber length is atypical ex...
متن کاملContinuous-fiber preform reinforcement of dental resin composite restorations.
OBJECTIVES Direct-filling resin composites are used in relatively small restorations and are not recommended for large restorations with severe occlusal-stresses. The aim of this study was to reinforce composites with fiber preforms, and to investigate the effects of layer thickness and configurations on composite properties. It was hypothesized that fiber preforms would significantly increase ...
متن کاملUltrastructural Aspects of Pulp Fibers as Studied by Dynamic FT-IR Spectroscopy
Dynamic (or 2D) FT-IR spectroscopy in combination with polarized IR irradiation has been used in this work to study wood polymer orientation and interactions on the ultrastructural level in wood fibers in the native state as well as the effects of different pulping processes. The wood polymer interactions were studied under both dry and humid conditions. The matrix of lignin and hemicelluloses ...
متن کامل