Thesis for the Degree of Master of Science Improving Time Series Prediction Using Recurrent Neural Networks and Evolutionary Algorithms

نویسندگان

  • ERIK HULTHÉN
  • Erik Hulthén
چکیده

In this thesis, artificial neural networks (ANNs) are used for prediction of financial and macroeconomic time series. ANNs build internal models of the problem and are therefore suited for fields in which accurate mathematical models cannot be formed, e.g. meteorology and economics. Feedforward neural networks (FFNNs), often trained with backpropagation, constitute a common type of ANNs. However, FFNNs suffer from lack of short-term memory, i.e. they respond with the same output for a given input, regardless of earlier inputs. In addition, backpropagation only tunes the weights of the networks and does not generate an optimal design. In this thesis, recurrent neural networks (RNNs), trained with an evolutionary algorithm (EA) have been used instead. RNNs can have short-term memory and the EA has the advantage that it affects the architecture of the networks and not only the weights. However, the RNNs are often hard to train, i.e. the training algorithm tends to get stuck in local optima. In order to overcome this problem, a method is presented in which the initial population in the EA is an FFNN, pre-trained with backpropagation. During the evolution feedback connections are allowed, which will transform the FFNN to an RNN. The RNNs obtained with both methods outperform both a predictor and the FFNN trained with backpropagation on several financial and macroeconomic time series. The improvement of the prediction error is small, but significant (a few per cent for the validation data set).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Gyroscope Random Drift Modeling, using Neural Networks, Fuzzy Neural and Traditional Time- series Methods

In this paper statistical and time series models are used for determining the random drift of a dynamically Tuned Gyroscope (DTG). This drift is compensated with optimal predictive transfer function. Also nonlinear neural-network and fuzzy-neural models are investigated for prediction and compensation of the random drift. Finally the different models are compared together and their advantages a...

متن کامل

Application of artificial neural networks on drought prediction in Yazd (Central Iran)

In recent decades artificial neural networks (ANNs) have shown great ability in modeling and forecasting non-linear and non-stationary time series and in most of the cases especially in prediction of phenomena have showed very good performance. This paper presents the application of artificial neural networks to predict drought in Yazd meteorological station. In this research, different archite...

متن کامل

Prediction of pore facies using GMDH-type neural networks: a case study from the South Pars gas field, Persian Gulf basin

The current study proposes a two-step approach for pore facies characterization in the carbonate reservoirs with an example from the Kangan and Dalanformations in the South Pars gas field. In the first step, pore facies were determined based on Mercury Injection Capillary Pressure (MICP) data incorporation with the Hierarchical Clustering Analysis (HCA) method. In the next step, polynomial meta...

متن کامل

Using Neural Networks and Genetic Algorithms for Modelling and Multi-objective Optimal Heat Exchange through a Tube Bank

In this study, by using a multi-objective optimization technique, the optimal design points of forced convective heat transfer in tubular arrangements were predicted upon the size, pitch and geometric configurations of a tube bank. In this way, the main concern of the study is focused on calculating the most favorable geometric characters which may gain to a maximum heat exchange as well as a m...

متن کامل

Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling

Machining processes such as end milling are the main steps of production which have major effect on the quality and cost of products. Surface roughness is one of the considerable factors that production managers tend to implement in their decisions. In this study, an artificial neural network is proposed to minimize the surface roughness by tuning the conditions of machining process such as cut...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004