Engineering Design about Electro-hydraulic Intelligent Control System of Tracked Vehicle Suspension
نویسندگان
چکیده
Based on the dynamics analysis about the tracked vehicle electro-hydraulic semi-active suspension model, the optimal damping ratio control method was given in the paper. According to the character of suspension control objects and the influence factors of the vehicle ride comfort performance, the distributed not real-time suspension control system project was given. In the paper, the hardware and the software of intelligent suspension control system were designed which were used in the tracked vehicle test. At last, the test result has proved the suspension control system designed in the paper of excellent effect and reliability, which can improve the vehicle vibration environment and make sure that the control system could be well applied. Copyright © 2014 IFSA Publishing, S. L.
منابع مشابه
Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)
This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...
متن کاملStability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller
Using hydraulic interconnected suspension (HIS) system to improve the stability of the vehicles is a matter of recent interest of many scholars. In this paper, application of this kind of suspension system and its impact on the stability of the vehicle are studied. The governing dynamic relations of the system are presented, using free body diagram, Newton-Euler motion equations, and relations ...
متن کاملEnhancement of vehicle stability by adaptive fuzzy and active geometry suspension system
In this paper, the enhancement of vehicle stability and handling is investigated by control of the active geometry suspension system (AGS). This system could be changed through control of suspension mounting point’s position in the perpendicular direction to wishbone therefore the dynamic is alternative and characteristics need to change. For this purpose, suitable controller needs to change...
متن کاملDEVELOPMENT OF A DC MOTOR ASSISTED HYDRAULIC BRAKING SYSTEM FOR AUTOMOTIVE USE
ABSTRACT: Deceleration or stopping the vehicle without any diving and lateral acceleration is essential to develop an effective braking system. The hydraulic braking system with intelligent braking called Antilock Braking system (ABS) and Electronic Stability Control (ESC) has been introduced. However, due to the insufficient human effort, the ABS and ESC to some extent, not function well...
متن کاملSemi-Active Control Strategies for High-Performance Motorcycles
The topic of this paper is the design and analysis of a control system for a semi-active suspension in a 2-wheel vehicle. The control system is implemented via a semi-active electro-hydraulic damper located on the rear suspension of a hypersport-class motorbike. The entire design and analysis procedure is outlined: the semi-active damper is analyzed and characterized; a wide range of control st...
متن کامل