A More Fault Tolerant Approach to Address Resolution for a Multi-lan System of Ethernets Status of This Memo
نویسنده
چکیده
Executing a protocol P, a sending host S decides, through P’s routing mechanism, that it wants to transmit to a target host T located somewhere on a connected piece of 10Mbit Ethernet cable which conforms to IEEE 802.3. To actually transmit the Ethernet packet, a 48 bit Ethernet/hardware address must be generated. The addresses assigned to hosts within protocol P are not always compatible with the corresponding Ethernet address (being different address space byte orderings or values). A protocol is presented which allows dynamic distribution of the information required to build tables that translate a host’s address in protocol P’s address space into a 48 bit Ethernet address. An extension is incorporated to allow such a protocol to be flexible enough to exist in a Transparent Bridge, or generic Host. The capability of the Bridge to detect host reboot conditions in a multi-LAN environment is also discussed, emphasising particularly the effect on channel bandwidth. To illustrate the operation of the protocol mechanisms, the Internet Protocol (IP) is used as a benchmark [6], [8]. Part 1 presents an introduction to Address Resolution, whilst Part 2 discusses a reboot detection process.
منابع مشابه
Stability Assessment Metamorphic Approach (SAMA) for Effective Scheduling based on Fault Tolerance in Computational Grid
Grid Computing allows coordinated and controlled resource sharing and problem solving in multi-institutional, dynamic virtual organizations. Moreover, fault tolerance and task scheduling is an important issue for large scale computational grid because of its unreliable nature of grid resources. Commonly exploited techniques to realize fault tolerance is periodic Checkpointing that periodically ...
متن کاملDesign of an Active Approach for Detection, Estimation and Short-Circuit Stator Fault Tolerant Control in Induction Motors
Three phase induction motors have many applications in industries. Consequently, detecting and estimating the fault and compensate it in a way that the faulty induction motor satisfies the predefined goals are important issues. One of the most common faults in induction motors is the short circuit of the stator winding. In this paper, an active fault-tolerant control system is designed and pres...
متن کاملA New Fault Tolerant Nonlinear Model Predictive Controller Incorporating an UKF-Based Centralized Measurement Fusion Scheme
A new Fault Tolerant Controller (FTC) has been presented in this research by integrating a Fault Detection and Diagnosis (FDD) mechanism in a nonlinear model predictive controller framework. The proposed FDD utilizes a Multi-Sensor Data Fusion (MSDF) methodology to enhance its reliability and estimation accuracy. An augmented state-vector model is developed to incorporate the occurred senso...
متن کاملAn approach to fault detection and correction in design of systems using of Turbo codes
We present an approach to design of fault tolerant computing systems. In this paper, a technique is employed that enable the combination of several codes, in order to obtain flexibility in the design of error correcting codes. Code combining techniques are very effective, which one of these codes are turbo codes. The Algorithm-based fault tolerance techniques that to detect errors rely on the c...
متن کاملReliability and Performance Evaluation of Fault-aware Routing Methods for Network-on-Chip Architectures (RESEARCH NOTE)
Nowadays, faults and failures are increasing especially in complex systems such as Network-on-Chip (NoC) based Systems-on-a-Chip due to the increasing susceptibility and decreasing feature sizes. On the other hand, fault-tolerant routing algorithms have an evident effect on tolerating permanent faults and improving the reliability of a Network-on-Chip based system. This paper presents reliabili...
متن کامل