Power supply noise coupling in a standard voltage reference circuit
نویسندگان
چکیده
منابع مشابه
Low Dropout Based Noise Minimization of Active Mode Power Gated Circuit
Power gating technique reduces leakage power in the circuit. However, power gating leads to large voltage fluctuation on the power rail during power gating mode to active mode due to the package inductance in the Printed Circuit Board. This voltage fluctuation may cause unwanted transitions in neighboring circuits. In this work, a power gating architecture is developed for minimizing power in a...
متن کاملLow Offset, High PSRR, CMOS Bandgap Voltage Reference
A CMOS Bandgap Voltage Reference (BVR) with the characteristics of low offset and high power-supply rejection ratio (PSRR) is presented. In order to reduce the effect of offset of operation amplifier (OPA), the voltage difference of base-emitter junctions of substrate bipolar transistors is maximized; meanwhile the factor of offset voltage could be minimized. The feedback loop constructed by pr...
متن کاملElectromagnetic Compatibility to Bio-Medical Signals Using Shielding Methods
This paper presents The Electromagnetic Interference effect from power line noise in Multi Speciality Hospital to Bio-Medical signals. The study includes the design of Bio-Medical signal Generating circuits that is used to eliminate the power line noise from the signal. The Bio-Medical system basically is a combination of Instrumentation Amplifier, High pass filter, Low pass filter, and Notch f...
متن کاملطراحی مرجع ولتاژ زیر یک ولت قابل کاشت در بدن با دقت ppm/میکرومتر15 با استفاده از ترانزیستورهای ذاتی(Native)
Voltage references are crucial part of every circuit, providing a fixed voltage regardless of environmental parameters and device loading. Among several approaches proposed for designing voltage references, bandgap voltage references are the most common, but the bandgap voltage reference is bipolar in nature and does not show good stability when the supply voltage is small. Thus according to th...
متن کاملHigh-Accurate Low-Voltage Analog CMOS Current Divider Modify by Neural Network and TLBO Algorithm
A high accurate and low-voltage analog CMOS current divider which operates with a single power supply voltage is designed in 0.18µm CMOS standard technology. The proposed divider uses a differential amplifier and transistor in triode region in order to perform the division. The proposed divider is modeled with neural network while TLBO algorithm is used to optimize it. The proposed optimiza...
متن کامل