Fabrication of a polymer/mediator composite modified electrode and its application to electrochemical detection of iodate
نویسندگان
چکیده
A polymer/mediator composite modified glassy carbon electrode (GCE) is fabricated for electrochemical detection of iodate (IO3 ). Flavin adenine dinucleotide (FAD) is chosen as mediator for sensing iodate, and 3,4 ethylenedioxythiophene (EDOT) is chosen for entrapping FAD and forming a conducting polymeric matrix, poly(3,4 ethylenedioxythiophene) (PEDOT). The PEDOT/FAD modification layer is electrodeposited on the GCE by cyclic voltammetric (CV) method. It is noted that FAD can enhance the electrodeposition of PEDOT, and possible reasons are proposed to explain this phenomenon. The optimal cycle number for preparing the modified electrode is determined to be 9. The relationship between the formal potential of FAD and the pH value is studied. Two slopes, 60.4 and 29.2 mV per pH unit, are recorded in the ranges of 1.5 pH 8.5 and 8.5 pH 11.5, respectively. Additionally, it is found that the oxidation current of iodate increases significantly with the decrease of pH value. © 2011 Published by Elsevier Ltd.
منابع مشابه
Fabrication of an Electrochemical Sensor Based on a New Nano-ion Imprinted Polymer for Highly Selective and Sensitive Determination of Molybdate
In this work a new chemically modified carbon paste electrode was constructed for accurate, simple, sensitive and selective determination of molybdenum (VI) ions. The results of modified electrode by an ion imprinted polymer were compared with those obtained with carbon paste electrode. The results showed the stripping peak currents had a dramatic increase at the modified electrode. Under the o...
متن کاملFabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin
A modified electrochemical sensor for the determination of amoxicillin (AMX) was reported in this paper. The magnetic molecularly imprinted polymer (MMIP) were suspended in AMX solution and then collected on the surface of a magnetic carbon paste electrode (CPE) via a permanent magnet, situated within the carbon paste electrode and then the voltammetry signals were recorded. It was confirmed th...
متن کاملSynthesis of TiO2 Nanoparticle and its Application to Graphite Composite Electrode for Hydroxylamine Oxidation
In this work, sol-gel method was used tosynthesize titanium dioxide nanoparticles (TiO2). The TiO2nanoparticles was characterized by Scanning Electron Microscopy (SEM), x-ray diffraction (XRD) and BET technique.The TiO2 and coumarin derivative (7-(1,3-dithiolan-2-yl)-9, 10-dihydroxy-6H-benzofuro [3,2-c] chromen-6-on) were incorporated in a graphite composite ele...
متن کاملFABRICATION AND ELECTROCATALYTIC APPLICATION OF NI-MODIFIED ELECTRODE TOWARD DETECTION OF PARACETAMOL
In the present work, the modified nickel electrode was electrochemically fabricated and tested for the electro-oxidation of paracetamol in alkaline media. The methods of cyclic voltammetry (CV), chronoamperometry (CA), and impedance spectroscopy (EIS) were used to determine kinetic parameters such as transfer coefficient (α), the catalytic reaction rate constants (k), and the diffusion coeffici...
متن کاملDesign and Fabrication of Biosensor Based on Immobilized AchE on Modified Electrode by Graphene-multiwall Carbon Nanotubs/Beta Cyclodexterin-chitosan
Organophosphorus (OP) forms an important class of toxic compounds. They inhibit acetyl cholinesterase (AChE, EC 3.1.1.7) that results in respiratory and myocardial malfunctions. Pesticides could be accumulated in vegetables and fruits, so detection of them is very important. The goals of this study are decreasing detection time and detection limit of methyl parathion bioprobe. In this research ...
متن کامل