Bolt 3D: A Case Study
نویسنده
چکیده
This paper presents an overview of the creative process and the technical challenges involved in the creation of the digital 3D presentation of the film Bolt, by Walt Disney Animation Studios.
منابع مشابه
The performance of bolt-reinforced and shotcreted in-stope pillar in a rockburst prone areas
Historically, the design of the in-stope pillar in underground excavations has been based on empirical formulae and numerical modelling. Although these design methods have been extensively applied in several gold mines in South Africa, rockburst, in-stope pillar burst/failure are continuously reported as the major problem faced by mines. Therefore, this study attempts to compare the performance...
متن کاملShear Strengths of Different Bolt Connectors on the Large Span of Aluminium Alloy Honeycomb Sandwich Structure
This study investigates the shear capacity of aluminum alloy honeycomb sandwich plates connected by high-strength, ordinary, or self-tapping bolts. For that purpose, experimental tests and finite elements are carried out. The failure of a high-strength bolt connector is driven by bending deformations developed in the bolt that deform connection plate and pad openings. In the case of ordinary bo...
متن کاملEffective of Main Bearing Bolt Manufacturing Parameters on Functional Performance in High Speed Diesel Engine using Torque-Angle Method
In marine diesel engine, main bearing bolts (M18×1.5) withstand large tensile and cyclic loads to keep the crank shaft, bearing whit acceptable clearance and precision clamping force at high crank speed like 3100 rpm. In this research, the relationship between torque and clamp force, the friction coefficient, the effect of number of tightening and bearing conditions on the new manufactured bolt...
متن کاملAnisotropic Plasticity and Failure Prediction in Wood Composites
Two case studies are summarized using anisotropic plasticity and the Weibull weakest link failure model to predict the behavior of wood and wood composites. The linear elastic orthotropic model normally used for wood is shown to be insufficient for the prediction of ultimate strength in wood. Non-linear, non-recoverable behavior in compression in each of the orthogonal material directions is of...
متن کاملEvaluation of Interlaminar Stresses in Composite Laminates with a Bolt-Filled Hole Using a Linear Elastic Traction-Separation Description
Determination of the local interlaminar stress distribution in a laminate with a bolt-filled hole is helpful for optimal bolted joint design, due to the three-dimensional (3D) nature of the stress field near the bolt hole. A new interlaminar stress distribution phenomenon induced by the bolt-head and clamp-up load, which occurs in a filled-hole composite laminate, is investigated. In order to e...
متن کامل