Determination of Temperature Field Distribution and Rate of Heat Transfer by Means of Thermal-electrical Analogy in DC Machine
نویسندگان
چکیده
In this paper is presented an analysis method of electrical circuits, more exactly nodal method, in order to compute the temperature field distribution necessary to the heating and ventilation systems of electrical machine. As analysis method, the modified nodal method was used which does not impose any restriction at the circuit structure, being a prevalence of the nodal method. For this reason, this method was used in the analysis programme of circuits called SPICE. In the software application called NAPACI, authors analyses the temperature field distribution and the rate of heat transfer which are necessary for a complete study to range of the temperature in steady state. This analysis supposes the knowledge and the localization of temperature losses values, determination of the rate values of heat transfer and their distribution in different sides of electrical machine. Comparing the results obtained by means of other two programmes NAPACI and SPICE, it can be observed that these results are identical. Key-Words: DC machine, steady-state, temperature field, rate of heat transfer, thermal resistance, generated power, consumed power, NAPACI programme
منابع مشابه
Numerical computation of temperature field distribution in a DC machine
In order to design correctly an electrical machine it is necessary that the machine cooling to be efficient and to know the values and the temperature distribution in this (in the rotor). To determine the temperature distribution, a thermal equivalent circuit is used for the heat transfer of machine. The thermal equivalent circuit is analogous to electric circuit, in which heat is generated by ...
متن کاملHeat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method
The development and production of high performance equipment necessitate the use of passive cooling technology. In this paper, heat transfer study of convective-radiative straight fin with temperature-dependent thermal conductivity under the influence of magnetic field is carried out using Legendre wavelet collocation method. The numerical solution is used to investigate the effects of magnetic...
متن کاملEffects of thermal diffusion and chemical reaction on MHD transient free convection flow past a porous vertical plate with radiation, temperature gradient dependent heat source in slip flow regime
An analytical investigation is conducted to study the unsteady free convection heat and mass transfer flow through a non-homogeneous porous medium with variable permeability bounded by an infinite porous vertical plate in slip flow regime while taking into account the thermal radiation, chemical reaction, the Soret number, and temperature gradient dependent heat source. The flow is considered u...
متن کاملSimulation of Temperature Distribution in Hot Strip over Transfer Table
Transfer table is an essential stage between roughing and finishing rolling stands in a hot-strip rolling mill. High temperature and long time that strip is exposed to air at this stage cause a considerable heat loss that accounts for uneven temperature distribution, non-uniform surfaces, reduced product quality and increased production costs. Using thermal shields on the transfer table is cons...
متن کاملInvestigating Tubes Material Selection on Thermal Stress in Shell Side Inlet Zone of a Vertical Shell and Tube Heat Exchanger
In this study, the effect of the tube material on the thermal stress generated in a vertical shell and tube heat exchanger is investigated. Shell and tube heat exchangers are the most common heat exchangers used in industries. One of the most common failures in these exchangers in the industry is the tube failure at the junction of the tube to tubesheet. When the shell side and the tube side fl...
متن کامل