Efficient Crosstalk Reduction Technique for Data Bus
نویسنده
چکیده
Crosstalk has become the great challenge to the design community in Deep-submicron (DSM) and Very Deepsubmicron (VDSM) technologies. As the portion of silicon area for interconnects and buses is dominating, crosstalk effect also dominates in deciding the reliability and performance of the SoCs and many types of processors. These interconnect and buses are prone to errors due to crosstalk. The major part of the crosstalk is due to coupling transitions occurring on the data bus and interconnects when signals are transmitted. One of the favorable techniques to reduce the crosstalk is to reduce the coupling transitions. Bus encoding technique is the promising method to reduce the crosstalk. Hence an efficient Crosstalk reduction data bus encoding scheme is proposed which can reduce the 6C, 5C and 4C crosstalk for 64-bit data bus around 88%, 68% and 24% respectively, for 32-bit data bus around 89%, 74% and 32% respectively and 16-bit data bus by 93%, 71% and 19% respectively.
منابع مشابه
Efficient Switching Activity Reduction Technique for Fault Tolerant Data Bus
In Deep-submicron (DSM) systems, the crosstalk effect on onchip data buses and interconnects dictates the overall performance and reliability of the highly integrated systems. In many digital processors and SoC the reliable transfer of the information over the data bus is crucial for the proper operation of a particular system. Hence ECC techniques are used on data buses for reliable transfer o...
متن کاملTemporal Redundancy Based Encoding Technique for Peak Power and Delay Reduction of On-Chip Buses
Power consumption and delay are two of the most important constraints in current-day on-chip bus design. The two major sources of dynamic power dissipation on a bus are the self capacitance and the coupling capacitance. As technology scales, the interconnect resistance increases due to shrinking wire-width. At the same time, spacing between the interconnects decreases resulting in an increase i...
متن کاملEfficient RC low-power bus encoding methods for crosstalk reduction
Abstact: In on-chip buses, the RC crosstalk effect leads to serious problems, such as wire propagation delay and dynamic power dissipation. Crosstalk noise is dominated by the coupling capacitance, resulting in wire propagation delay, logical malfunction and power dissipation on on-chip buses. Therefore, eliminating crosstalk effects have become a very important consideration in the development...
متن کاملA unified transformational approach for reductions in fault vulnerability, power, and crosstalk noise & delay on processor buses
In this paper we propose a coding scheme for general-purpose applications that can reduce power dissipation, crosstalk noise and crosstalk delay on the bus lines while simultaneously detecting errors at run time. The reduction in power dissipation can be achieved through reducing the bus switching activity. Not only is the switching activity in individual lines reduced but so is the coupling ac...
متن کاملOptimization of Delay and Energy in On-Chip Buses using Bus Encoding Technique
In very deep sub-micron (VDSM) fault-tolerant busses, crosstalk noise and logic faults caused due to shrinking wiresize and reduced inter-wire spacing are major factors affecting the performance of onchip interconnects, such as high power consumption and increased delay. In this paper we propose a bus optimization technique which reduce the energy and power-delay using Hamming Single Error Corr...
متن کامل