Recent improvements of the JET lithium beam diagnostic.
نویسندگان
چکیده
A 60 kV neutral lithium diagnostic beam probes the edge plasma of JET for the measurement of electron density profiles. This paper describes recent enhancements of the diagnostic setup, new procedures for calibration and protection measures for the lithium ion gun during massive gas puffs for disruption mitigation. New light splitting optics allow in parallel beam emission measurements with a new double entrance slit CCD spectrometer (spectrally resolved) and a new interference filter avalanche photodiode camera (fast density and fluctuation studies).
منابع مشابه
Enhanced low-noise gain from InAs avalanche photodiodes with reduced dark current and background doping
Related Articles GeSn p-i-n detectors integrated on Si with up to 4% Sn Appl. Phys. Lett. 101, 141110 (2012) Characterization of dark current in Ge-on-Si photodiodes J. Appl. Phys. 112, 054506 (2012) P-type interface charge control layers for enabling GaN/SiC separate absorption and multiplication avalanche photodiodes Appl. Phys. Lett. 101, 093506 (2012) Recent improvements of the JET lithium ...
متن کاملOptimization of apertures and collimators for multi-channel plasma diagnostics
Related Articles High-resolution charge exchange measurements at ASDEX Upgrade Rev. Sci. Instrum. 83, 103501 (2012) A portable optical emission spectroscopy-cavity ringdown spectroscopy dual-mode plasma spectrometer for measurements of environmentally important trace heavy metals: Initial test with elemental Hg Rev. Sci. Instrum. 83, 095109 (2012) Recent improvements of the JET lithium beam dia...
متن کاملElectron Density Profiles from the Probabilistic Analysis of the Lithium Beam at JET
Introduction The lithium beam diagnostic provides a powerful edge plasma diagnostic. It enables the determination of electron density profiles in the scrape-of-layer and pedestal region with high spatial and temporal resolution (∆t ≈ 50ms, ∆x ≈ 1cm). A fast neutral lithium beam (beam energy at JET: 55 keV) is injected into the plasma and the line radiation emitted by the collisionally excited l...
متن کاملDeuteron beam interaction with lithium jet in a neutron source test facility I
Testing and evaluating candidate fusion reactor materials in a high-flux, high-energy neutron environment are critical to the success and economic feasibility of a fusion device. The current understanding of materials behavior in fission-like environments and existing fusion facilities is insufficient to ensure the necessary performance of future fusion reactor components. An accelerator-based ...
متن کاملAnalysis of beam-on-target interaction in a neutron-source test facility *
The need is urgent for a high-flux, high-energy neutron test facility to evaluate the performance of fusion reactor materials. An accelerator-based deuterium-lithium source is generally considered the most reasonable approach to a high-flux neutron source in the near future. The idea is to bombard a high-energy (20-40 MeV) deuteron beam into a lithium jet target to produce high-energy neutrons ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Review of scientific instruments
دوره 83 10 شماره
صفحات -
تاریخ انتشار 2012