Reaction of cobalt-chromium casting alloy with investment.
نویسندگان
چکیده
REACTION DE ALLIGATO FUSIONAL DE COBALT E CHROMO CON INVESTIMENTO.-Alterationes chimic occurrente intra le investimento ligate a phosphate durante le prisa e le cocer esseva determinate per technicas a diffraction de radios X. Es postulate le occurrentia de certe reactiones durante le processo. Tests del resistentia al compression effectuate a varie temperatures corroborava ille postulates. Esseva trovate al interfacie inter alligato e investimento tres productos de reaction. Immediatemente adjacente al alligato se formava un scalia de color gris sequite de un intimemente adherents scalia de color verde. Esseva etiam trovate intra le investimento areas de un composite de color rubiastre-brun. Le sonda electronic esseva usate pro analysar iste productos.
منابع مشابه
Platinum Investment Casting , Part II : Alloy
Two widely used jewellery investment casting alloys (platinum with 5 wt% ruthenium (Pt-5Ru) and platinum with 5 wt% cobalt (Pt-5Co)) suffer from poor castability and other drawbacks. In this work thermodynamic calculations of alloy properties were employed to optimise the alloy compositions. Segregation behaviour appeared to be important for the melting range. Scheil simulations were used to si...
متن کاملEffect of alloy type and casting technique on the fracture strength of implant-cemented structures.
OBJECTIVES To evaluate the influence of alloy type and casting procedure on the fracture strength (FS) of metallic frameworks for implant-supported fixed prostheses. STUDY DESIGN Thirty three-unit structures for lower posterior bridges were waxed-up and randomly assigned to two groups (n=15) according to alloy type and casting technique: Group 1 (C): cobalt-chromium cast in a centrifugal mach...
متن کاملCorrosion Resistance and Microstructure of Recasting Cobalt Alloys Used in Dental Prosthetics
The work presents the results of the studies of Co-Cr-Mo casting alloys used in the production of frame casts of removable dentures, crowns and bridges in dental prosthetics. The studies were performed on four Co-Cr-Mo alloys of different contents of Mo, W and other additives. Electrochemical tests were performed, which aimed at examining the corrosion resistance of the alloys and observing the...
متن کاملEffect of surface passivation on corrosion of a cobalt-chromium dental alloy: surface morphology and chemical composition studies
Abstract Background and Aim: Biocompatibility in some respects depends on the corrosion behavior of dental alloys. The purpose of this study was to investigate the effect of surface passivation of a cobalt chromium alloy on corrosion behavior. Materials and methods: In this experimental study, 20 samples of Flexicast dental alloy were prepared according to ADA97 standard and after casting, t...
متن کاملComparative Evaluation of Metal-ceramic Bond Strengths of Nickel Chromium and Cobalt Chromium Alloys on Repeated Castings: An In vitro Study
BACKGROUND Recasting the base metal alloys is done as a routine procedure in the dental laboratories whenever there is casting failure or to decrease the unit cost of a fixed partial denture. However, this procedure may affect the metal ceramic bond. Furthermore, it is unclear, as to which test closely predicts the bond strength of metal-ceramic interface. The aim was to compare the bond streng...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of dental research
دوره 45 5 شماره
صفحات -
تاریخ انتشار 1966