New final doublets and power densities for the ILC small crossing angle layout

نویسنده

  • R. Appleby
چکیده

In this paper we use current and proposed final doublet magnet technologies to reoptimise the interaction region of the International Linear Collider and reduce the power losses. The result is a set of three new final doublet layouts with improved beam transport properties. The effect of localised power deposition is considered, and its reduction using Tungsten liners.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improved final doublet designs for the ILC baseline small crossing angle scheme

The ILC baseline consists of two interaction regions, one with a 20mrad crossing angle and the other with a 2mrad crossing angle. It is known that the outgoing beam losses in the final doublet and subsequent extraction line are larger in the 2mrad than in the 20mrad layout. In this work, we exploit NbTi and Nb3Sn superconducting magnet technologies to redesign and optimise the final doublet, wi...

متن کامل

The Layout of the photon collider at the ILC ∗

One of the interaction regions at the linear colliders should be compatible both with e + e − and γγ,γe modes of operation. In this paper, the differences in requirements and possible design solutions are discussed. The photon collider (γγ, γe) is being considered as an " option " in the International Linear Collider (ILC) project [1–3], while e + e − collisions are " baseline ". In reality, th...

متن کامل

Simulation of Wakefield Effect in Ilc Ir Chamber*

To achieve super high luminosity, high current beams with very short bunch length are needed, which carry high intensity EM fields. For ILC, two bunch trains with bunch length of 300μm and bunch charge of 3.2nC are needed to collide at the IR to achieve the ILC luminosity goals. When the 300μm bunches pass through the IR chamber, wakefields will be excited, which will cause HOM power flowing th...

متن کامل

The 2mrad horizontal crossing angle IR layout for a TeV ILC

In this article, we describe the recent development of the 2mrad horizontal crossing angle scheme for the ILC. To date, two parallel designs have emerged: the first coming from the UK and France and the second from SLAC and BNL. We shall describe both schemes here, although they share many common features and are now being developed in parallel under the unified SLAC-BNL-UK-France task force co...

متن کامل

The Impact of BeamCal Performance at Different ILC Beam Parameters and Crossing Angles on τ̃ searches

The ILC accelerator parameters and detector concepts are still under discussion in the worldwide community. As will be shown, the performance of the BeamCal, the calorimeter in the very forward area of the ILC detector, is very sensitive to the beam parameter and crossing angle choices. We propose here BeamCal designs for a small (0 or 2 mrad) and large (20 mrad) crossing angles and report abou...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006