Fabrication and characterization of a planar interleaved micro-transformer with magnetic core
نویسندگان
چکیده
This paper presents the design, the fabrication and the characterization of a planar interleaved microtransformer with an Yttrium Iron Garnet (YIG) core. The design of this micro-transformer and the manufacturing steps are presented. HFSS software is used for the conception and the simulation of the interleaved magnetic micro-transformer. It is composed of two identical windings. A bottom magnetic core is used to improve the integrated transformer performances. To form the windings, we have used a surface micromachining process. We have also used a negative photoresist (SU-8) as an insulating layer and as support for the fabrication of a bridge to connect the central end of the coils to the ground shield. The micro-transformer have been characterized with impedance meter up to 100 MHz, and completed to 1 GHz using vector network analyzer. & 2014 Elsevier Ltd. All rights reserved.
منابع مشابه
Fabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملDesign and fabrication of a 29 H bondwire micro-transformer with LTCC magnetic core on silicon for energy harvesting applications
This paper presents the design of a 1 : 50 bondwire micro-transformer assembled with IC gold bonding wires and a toroidal LTCC magnetic core with race-track shape. The transformer is fabricated on-top of a standard BCD IC in a 15 mm footprint area for micro-power energy harvesting applications. Measurements show a secondary self-inductance up to 29 μH with a maximum Q-factor of 11.6 at 1.3 MHz,...
متن کاملDesigning and Fabrication of a New Radiofrequency Planar microcoil for mini-Nuclear Magnetic Resonance
Introduction Radiofrequency planar microcoils are used to increase the resolution of magnetic resonance images of small samples. In this study, we aimed to design and fabricate a spiral planar microcoil constructed on a double-sided printed circuit board (PCB). It has four rings with an internal diameter of 241 microns tuned and matched at 63.8 MHz. Materials and Methods To achieve the maximum ...
متن کاملDesign and fabrication of a prototype planar undulator
The main goal of this work is to get the fabrication technology of the insertion devices. A prototype undulator with the period of 48mm and the peak magnetic field of 0.75 T has been fabricated using NdFeB-SH35 magnets based on the cooperation between ILSF and NSTRI. The total magnet length is 483 mm and the number of periods is 8. The magnetic parameters of the undulator are determined in orde...
متن کاملSynthesis and Characterization of a Novel Fe3O4-SiO2@Gold Core-Shell Biocompatible Magnetic Nanoparticles for Biological and Medical Applications
Objectives: The study of core-shell magnetic nanoparticles has a wide range of applications because of the unique combination of the nanoscale magnetic core and the functional shell. Characterization and application of one important class of core-shell magnetic nanoparticles (MNPs), i.e., iron oxide core (Fe3O4/γ-Fe2O3) with a silica shell and outer of gold (Fe3O4-SiO2@Gold (FSG)) in Boron Neut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Microelectronics Journal
دوره 45 شماره
صفحات -
تاریخ انتشار 2014