High-impact polystyrene/polyaniline membranes for acid solution treatment by electrodialysis: preparation, evaluation, and chemical calculation.
نویسندگان
چکیده
In this study different membranes were produced, aiming to evaluate their use in electrodialysis. These membranes were produced using conventional polymer (high-impact polystyrene) and polyaniline. The membrane characterization was done by FTIR spectroscopy, scanning electron microscopy (SEM), and thermogravimetry (TGA). The studies of the zinc and proton extraction ionic transport through the membranes were evaluated using a three-compartment cell. The results obtained using the produced membranes were compared to the results obtained with the commercial membrane Nafion 450. It was found that a synthesized membrane can be used to recover zinc in acid media. In addition, a preliminary computational essay about the structures of PAni and CSA is presented.
منابع مشابه
Mixed matrix membranes prepared from high impact polystyrene with dispersed TiO2 nanoparticles for gas separation
The current study presents synthesis and characterization of high impact polystyrene - TiO2 nanoparticles mixed matrix membranes for separation of carbon dioxide from nitrogen. The solution-casting method was used for preparation of membranes. The nano mixed matrix membranes were characterized using scanning electron microscopy to ensure the suitable dispersion of nano particles in high impact ...
متن کاملMonopolar and Platinum Interfaced Bipolar Membrane Electrodialysis: Experimental Assessment Using Synthetic Salt Solution Heterogeneous Cation Exchange Membranes
In this study, polystyrene ethylene butylene polystyrene (PSEBS) was functionalized to prepare mono and bipolar ion exchange membranes. In the case of the bipolar membrane, platinum was used as the intermediate layer. NaCl solution of concentration ranging from 5 g/L to 25 g/L was used as the feed solution. A commercially procured ion exchange membrane made of polystyrene divinyl benzene was al...
متن کاملPreparation of Polyaniline-Polystyrene-ZnO Nanocomposite and Characterization of Its Anti-Corrosive Performance
In this research, firstly polyaniline-zinc oxide (PANI-ZnO) nanocomposite was successfully synthesized by chemical polymerization of aniline in the presence of ZnO nanoparticles and then, 5%, 10% and 15% solutions of PANI–ZnO nanocomposites were mixed with a solution of polystyrene (PS) in tetrahydrofurane (THF) and PANI-PS-ZnO nanocomposites were obtained. The prepared nanocomposites were used...
متن کاملPreparation of Solid Phase Microextraction (SPME) Probes through Polyaniline Multiwalled Carbon Nanotubes (PANI/MWCNTs) Coating for the Extraction of Palmitic Acid and Oleic Acid in Organic Solvents
A fiber coating from polyaniline (PANI) was electrochemically prepared and employed for Solid phase micreoextraction (SPME). The PANI film was directly electrodeposited on the platinum wire surface using cyclic voltametry (CV) technique. The same method was applied for the preparation of SPME fiber coated by polyaniline multiwalled carbon nanotubes (PANI/MWCNTs) composite. The concentration of ...
متن کاملElectrodialysis Heterogeneous Anion Exchange Membranes Filled with TiO2 Nanoparticles: Membranes' Fabrication and Characterization
In the current research, polyvinylchloride based mixed matrix heterogeneous anion exchange membranes were prepared by a solution casting technique. Titanium dioxide nanoparticles were also utilized as inorganic filler additive in the membrane fabrication. The effect of TiO2 nanoparticles concentration in the casting solution on the membrane physico-chemical properties was studied. Membrane wate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of colloid and interface science
دوره 320 1 شماره
صفحات -
تاریخ انتشار 2008