On the determination of fiber tilt angles in fiber diffraction.
نویسنده
چکیده
The common digital method that is used to eliminate the effect of fiber tilt from fiber diffraction patterns is based on an approximation given by Franklin & Gosling [Acta Cryst. (1953), 6, 678-685]. The estimate of the tilt angle is iteratively optimized in the so-called ;Fraser correction'. Building on the fundamental work of Polanyi [Z. Phys. (1921), 7, 149-180], the exact solution is presented.
منابع مشابه
Investigation of Mechanical Features at Macroscopic Scale for Friction Stir Welding of Polypropylene Strengthened with 40% Glass Fiber
In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...
متن کاملPhysical Determination of Permeability Variation With Porosity For Composite Performs
Abstract: This paper presents the results of experimental determination of fiber bed permeability variation with porosity. Flow measurement experiments were designed to measure fiber mat permeability for fiber beds with various fiber volume fractions. Woven fiberglass, chopped fiberglass, and carbon fiber mats were used as reinforcements. The effects of reinforcement type and porosity on fiber ...
متن کاملHCl- Etched Steel Fiber for Determination of Phthalates in Water Samples by Solid-Phase Microextraction
In the present work, a stainless steel wire was etched by hydrochloric acid during a chemical etching process. The obtained black layer on the surface of the fiber was used as sorbent for extraction of trace amount of phthalates in the aqueous samples by solid phase microextraction. New fiber efficiency was investigated using a home-made solid-phase microextraction (SPME) device and gas chr...
متن کاملBuckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity
Fiber-reinforced laminated composites are frequently preferred in many engineering projects. With the development in production technology, the using of the fiber reinforced laminated composites has been increasing in engineering applications. In the production stage of the fiber-reinforced laminated composites, porosities could be occurred due to production or technical errors. After a level o...
متن کاملOrdered nanoporous carbon (CMK-3) coated fiber for solid-phase microextraction of benzene and chlorobenzenes in water samples
Nanoporous carbons (CMK-3) were prepared and have been used as a fiber coating for headspace solid phase microextraction (HS-SPME). The prepared materials were characterized by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and N2 adsorption/desorption isotherms. The efficiency of the fiber was evaluated using a gas chromatography (GC) system for the extraction of benzene (B) and c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Acta crystallographica. Section A, Foundations of crystallography
دوره 65 Pt 1 شماره
صفحات -
تاریخ انتشار 2009