Comparison of Setting Time Measured Using Ultrasonic Wave Propagation with Saw-Cutting Times on Pavements
نویسندگان
چکیده
At present, there is little fundamental guidance available to assist contractors in choosing when to schedule saw cuts on joints. To conduct pavement finishing and sawing activities effectively, however, contractors need to know when a concrete mixture is going to reach initial set, or when the sawing window will open. Previous research investigated the use of the ultrasonic pulse velocity (UPV) method to predict the saw-cutting window for early entry sawing. The results indicated that the method has the potential to provide effective guidance to contractors as to when to conduct early entry sawing. The aim of this project was to conduct similar work to observe the correlation between initial setting and conventional sawing time. Sixteen construction sites were visited in Minnesota and Missouri over a two-year period. At each site, initial set was determined using a p-wave propagation technique with a commercial device. Calorimetric data were collected using a commercial semi-adiabatic device at a majority of the sites. Concrete samples were collected in front of the paver and tested using both methods with equipment that was set up next to the pavement during paving. The data collected revealed that the UPV method looks promising for early entry and conventional sawing in the field, both early entry and conventional sawing times can be predicted for the range of mixtures tested.
منابع مشابه
Comparison of Setting Time Measured Using Ultrasonic Wave Propagation with Saw-Cutting Times on Pavements Technical Report
متن کامل
Comparison of Setting Time Measured Using Ultrasonic Wave Propagation With Saw-Cutting Times on Pavements in Iowa
The mission of the National Concrete Pavement Technology Center is to unite key transportation stakeholders around the central goal of advancing concrete pavement technology through research, tech transfer, and technology implementation. The contents of this report reflect the views of the authors, who are responsible for the facts and the accuracy of the information presented herein. The opini...
متن کاملThe Effect of Indole Butyric Acid and the Time of Stem Cutting Preparation on Propagation of Damask Rose Ornamental Shrub
In order to investigate the morphological reactions of cutting of damask rose to IBA (indole butyric acid) in different times, an experiment was done in a factorial experiment based on RCD and three times with three replications and 10 observations per each replication. In this experiment, the simple effects of IBA, time and their interaction effects were measured against morphological properti...
متن کاملPerformance evaluation of gang saw using hybrid ANFIS-DE and hybrid ANFIS-PSO algorithms
One of the most significant and effective criteria in the process of cutting dimensional rocks using the gang saw is the maximum energy consumption rate of the machine, and its accurate prediction and estimation can help designers and owners of this industry to achieve an optimal and economic process. In the present research work, it is attempted to study and provide models for predicting the m...
متن کاملUltrasonic characterization of mechanical properties of Cr- and W-doped diamond-like carbon hard coatings
Two ultrasonic nondestructive evaluation methods have been applied to systematically characterize the mechanical properties of nanostructured physical vapor deposited diamond-like carbon (DLC) ultra-hard coatings. A photoacoustic guided-wave technique is used to generate broadband surface acoustic waves (SAW) on the coating surfaces, and dispersion relations of the SAW for DLC coatings are meas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016