Effect of plastic deformation on the formation of acicular ferrite

نویسندگان

  • C. H. Lee
  • H.-C. Lee
چکیده

The effect of plastic deformation on the transformation of austenite to acicular ferrite in a Fe /Mn /Si /C alloy steel containing non-metallic inclusions was investigated. The transformation to acicular ferrite is retarded and the final fraction of acicular ferrite is reduced in plastically deformed austenite, which is a characteristic of a displacive transformation mechanism. The increase in the chemical driving force for transformation due to large undercooling below the Bs temperature overcomes the efficacy of dislocations in preventing the growth of acicular ferrite. # 2003 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Inclusions on Acicular Ferrite Formation in Submerged Arc Welding of API5L-X65

In the present study, effect of inclusions characteristics changing on the formation of acicular ferrite in submerged arc welding of API5l-X65 low alloy steel was investigated. Three different welding fluxes with different chemical composition and basicity index of 0.72, 0.82 and 0.99, and two different welding heat inputs of 1.6 kJ / mm and 2.4 kJ / mm were used to create inclusions with diffe...

متن کامل

Effect of Inclusions on Acicular Ferrite Formation in Submerged Arc Welding of API5L-X65

In the present study, effect of inclusions characteristics changing on the formation of acicular ferrite in submerged arc welding of API5l-X65 low alloy steel was investigated. Three different welding fluxes with different chemical composition and basicity index of 0.72, 0.82 and 0.99, and two different welding heat inputs of 1.6 kJ / mm and 2.4 kJ / mm were used to create inclusions with diffe...

متن کامل

Effect of Acicular Ferrite on Cracking Sensibility in the Weld Metal of Q690+Q550 High Strength Steels

High strength steels Q690+Q550 were welded using three different welding wires without preheating by gas shielded arc welding process. Microstructural characteristics of weld metals and nucleation mechanism of acicular ferrite were investigated by means of scanning electron microscope (SEM), energy dispersive spectrum (EDS) and transmission electron microscope (TEM). The straight Y-groove test ...

متن کامل

Investigation of the effect of heat input on the properties of HSLA 100 steel weld joints produced by SMAW process

The microstructure and mechanical properties of HSLA-100 steel weld joints was investigated. Welding with three heat input of 0.820, 1.176 and 1.392 kJ / mm was performed using E12018 electrode. Microstructural studies were performed using scanning electron and optical microscopes. The mechanical properties of welded joints were evaluated by impact and microhardness tests. Microstructural studi...

متن کامل

Lattice Misfit between Inclusion and Acicular Ferrite in Weld Metal of Low Carbon Low Alloy Steel

To clarify the mechanism of acicular ferrite formation in low carbon submerged arc weld metals of a Ti-B system with different aluminum contents, the lattice misfit between inclusion and acicular ferrite was investigated. The inclusions were directly sliced into thin foils by a focused ion beam device and crystallographic analyses were performed using a transmission electron microscope. These i...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003