Investigation on the Plasma-Induced Emission Properties of Large Area Carbon Nanotube Array Cathodes with Different Morphologies
نویسندگان
چکیده
Large area well-aligned carbon nanotube (CNT) arrays with different morphologies were synthesized by using a chemical vapor deposition. The plasma-induced emission properties of CNT array cathodes with different morphologies were investigated. The ratio of CNT height to CNT-to-CNT distance has considerable effects on their plasma-induced emission properties. As the ratio increases, emission currents of CNT array cathodes decrease due to screening effects. Under the pulse electric field of about 6 V/μm, high-intensity electron beams of 170-180 A/cm(2) were emitted from the surface plasma. The production mechanism of the high-intensity electron beams emitted from the CNT arrays was plasma-induced emission. Moreover, the distribution of the electron beams was in situ characterized by the light emission from the surface plasma.
منابع مشابه
In-FEEP Thruster Ion Beam Neutralization with Thermionic and Field Emission Cathodes
Charge neutralization of an In-FEEP thruster was demonstrated with three different electron sources by zeroing the floating potential of the thruster and neutralizer system. The three cathodes used in the investigation include a mixed metal thermionic cathode, a carbon nanotube field emission cathode, and a Spindt-type Mo field emission array cathode. The field emission cathodes significantly i...
متن کاملOperation of Spindt-Type, Carbon Nanotube Cold Cathodes in a Hall Effect Thruster Environment
Electric propulsion devices for space applications greatly reduce the propellant mass requirements on a spacecraft in comparison to chemical rockets. To date, gridded ion engines and Hall effect thrusters (HETs) rely on thermionic hollow cathodes to supply electrons for propellant ionization and ion beam neutralization. Hollow cathodes consume up to 10% of the total propellant used in low-power...
متن کاملCarbon-nanotube-polymer nanocomposites for field-emission cathodes.
The electron field-emission (FE) characteristics of functionalized single-walled carbon-nanotube (CNT)-polymer composites produced by solution processing are reported. It is shown that excellent electron emission can be obtained by using as little as 0.7% volume fraction of nanotubes in the composite. Furthermore by tailoring the nanotube concentration and type of polymer, improvements in the c...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کاملDemonstration of Field Emission Cathode Operation in a Plasma Environment
Field emission cathodes are being considered for use on low-power electrostatic and electromagnetic propulsion systems as well as on electrodynamic tether systems. In these systems, field emission cathodes prevent negative spacecraft charging by emitting a lowpower electron beam that is accommodated by the ambient plasma. Prototype cathodes were tested at the University of Michigan as part of a...
متن کامل