Characterization of New Surface Morphologies
نویسنده
چکیده
in a Hydrogen-Bonded Multilayer System by Allison Kunz Submitted to the Department of Materials Science and Engineering in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science at the Massachusetts Institute of Technology December 2007 © Allison Kunz All Rights Reserved The author hereby grants to MIT permission to reproduce and to distribute publicly paper and electronic copies of this thesis document in whole or in part in any medium now known or hereafter created.
منابع مشابه
Characterization of CaSn(OH)6 and CaSnO3 Nanostructures Synthesized by a New Precursor
In this paper, calcium stannate nanoparticles were synthesized by a fast and simple co-precipitation procedure. For CaSnO3 preparation ammonia was used as precipitation agent. The effect of various surfactants such as cationic, anionic and neutral on the morphology of the products was investigated. By changing in Ca(Sal)2 as a new precursor different morphologies were obtained. Ligand as a capp...
متن کاملInvestigation on the ordering of titanium oxide nanotubes fabricated by anodization on different substrate surface morphologies
In this study, titanium oxide nanotubes anodized on threedifferent surface morphologies of titanium foils, were investigated. AFM imagesis used to show different surface roughness of these foils. Nanotubes wereanodized on titanium foils with 1) no polishing process (A sample), 2)electropolishing process (B sample) and 3) electropolishing process in ethanolicelectrolyte (C sample). To study the ...
متن کاملFabrication and nanostructural characterization of TiO2 nanorods
TiO2 nanorods are synthesized by a thermal corrosion. In present work, synthesis of TiO2 nanorods in anatase, rutile and Ti8O15 phases, by using the sol-gel method and alkaline corrosion are reported. The morphologies and crystal structures of TiO2 nanorods are characterized by use of field emission scanning electron microscopy, atomic force microscopy and X-ray diffractometer techniques. The o...
متن کاملCathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology
Abstract YAG (Yttrium Aluminum Garnet) was successfully prepared through cathodic electrodeposition process using applying different current densities to the mixture of YCl3 and AlCl3 dissolved in water/ethanol 1:1 solution. Hydroxide precursors were cathodically grown on the cathode surface (at different current densities) and then the obtained hydroxide powder was heat-treated at 1100 °...
متن کاملSynthesis, characterization and investigation of optical and photocatalytic properties of zinc oxide nanoparticles in three different rod, spherical and sheet morphologies
In the present study, zinc oxide nanoparticles in three different forms (spherical, rod and sheet) were synthesized by a hydrothermal method. The obtained products were characterized by X-ray diffraction (XRD), filed emission scanning electron microscopy (FESEM), EDX elemental analysis and UV-Vis spectroscopy. The photocatalytic properties were investigated using congo red (CR) degradation unde...
متن کاملEffect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-velocity Oxyfuel Processes
In this study, the effect of surface morphologies on the isothermal oxidation behavior of MCrAlY coatings fabricated by high-velocity oxyfuel (HVOF) processes was investigated. To do so, free standing coatings with as-sprayed and polished surfaces were isothermally oxidized at 1050°C. The thickness of the bond coat was approximately 380μm. The Ra of the as-sprayed and polished surfaces were 6.4...
متن کامل