Wave and Symbol Phase Lock Loop with Noise
نویسندگان
چکیده
1 The PLL (Phase Lock Loop) can synchronize with a deterministic input wave or with a random input symbols. In the first case we have a WPLL (Wave Phase Lock Loop) and in the second case we have a SPLL (Symbol Phase Lock Loop. The WPLL (Wave Phase Lock Loop) is also known as WLL (Wave Lock Loop) or only PLL (Phase Lock Loop). The SPLL (Symbol Phase Lock Loop) is also known as SLL (Symbol Lock Loop). The main objective is to study four WPLL types and four SPLL types in the presence of noise.
منابع مشابه
Dual Phase Detector Based Delay Locked Loop for High Speed Applications
In this paper a new architecture for delay locked loops will be presented. One of problems in phase-frequency detectors (PFD) is static phase offset or reset path delay. The proposed structure decreases the jitter resulted from PFD by switching two PFDs. In this new architecture, a conventional PFD is used before locking of DLL to decrease the amount of phase difference between input and outpu...
متن کاملSynchronization and SNR Estimation in M-PSK Wireless Receivers
Coherent M-PSK reception in M-PSK receivers is achieved through use of two main PLLs (Phase Lock Loops): the carrier synchronization PLL (carrier PLL for short) and the symbol timing synchronization PLL (symbol PLL for short). An SNR (Signal-to-Noise Ratio) estimation module is also typically present in the receiver. In this paper we shall present an overview of contemporary coherent M-PSK rece...
متن کاملRobust and Simple Phase and Timing Synchronization for M-ary Partial-Response CPM
Abstract |We consider carrier phase and symbol timing synchronization for M-ary partial-response continuous phase modulation (CPM).We focus on developing a classical phase locked loop (PLL)-basedmethod that is robust even forM-ary partial-response CPMs, which has proven to be elusive thus far in the literature. A key part of our design is a simple yet eective timing false lock detector, which ...
متن کاملEstimation of Break-Lock Conditions for Effective Jamming in Missile Borne Monopulse Receivers
–Missile borne Monopulse receivers invariably track the target in three domains, namely frequency, range and angle. For effective jamming of these receivers, it is essential that breaking of the track should be achieved in at least two domains. In frequency domain, so long as the monopulse receiver locks onto the radar echo frequency, the radar tracks the target. When there is a disturbance int...
متن کاملCW Wideband Radar Receiver with Digital Noise Reduction Algorithm
Here we present a Continuous Wave radar receiver with a digital noise cancellation circuit. The leakage signal is cancelled by the mixer/PLL followed by an analog low pass filter also works as anti aliasing filter for the Ato-D. The digital signal processing after A-to-D cancels the analog thermal noise from front end which is mathematically AWGN in nature. We assume synchronous CDMA transmissi...
متن کامل