Preliminary Investigation of an SOI-based Arrayed Waveguide Grating Demodulation Integration Microsystem
نویسندگان
چکیده
An arrayed waveguide grating (AWG) demodulation integration microsystem is investigated in this study. The system consists of a C-band on-chip LED, a 2 × 2 silicon nanowire-based coupler, a fiber Bragg grating (FBG) array, a 1 × 8 AWG, and a photoelectric detector array. The coupler and AWG are made from silicon-on-insulator wafers using electron beam exposure and response-coupled plasma technology. Experimental results show that the excess loss in the MMI coupler with a footprint of 6 × 100 μm(2) is 0.5423 dB. The 1 × 8 AWG with a footprint of 267 × 381 μm(2) and a waveguide width of 0.4 μm exhibits a central channel loss of -3.18 dB, insertion loss non-uniformity of -1.34 dB, and crosstalk level of -23.1 dB. The entire system is preliminarily tested. Wavelength measurement precision is observed to reach 0.001 nm. The wavelength sensitivity of each FBG is between 0.04 and 0.06 nm/dB.
منابع مشابه
Large-Area Binary Blazed Grating Coupler between Nanophotonic Waveguide and LED
A large-area binary blazed grating coupler for the arrayed waveguide grating (AWG) demodulation integrated microsystem on silicon-on-insulator (SOI) was designed for the first time. Through the coupler, light can be coupled into the SOI waveguide from the InP-based C-band LED for the AWG demodulation integrated microsystem to function. Both the length and width of the grating coupler are 360 μm...
متن کاملOptimal Design of an Ultrasmall SOI-Based 1 × 8 Flat-Top AWG by Using an MMI
Four methods based on a multimode interference (MMI) structure are optimally designed to flatten the spectral response of silicon-on-insulator- (SOI-) based arrayed-waveguide grating (AWG) applied in a demodulation integration microsystem. In the design for each method, SOI is selected as the material, the beam propagation method is used, and the performances (including the 3 dB passband width,...
متن کاملDesign of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کاملDevelopment of Interrogators for Multiplexed Bragg Grating Sensors Progress Report
The increasing requirement for efficient and cost effective aircraft fleet management necessitates the integration of on-line health monitoring capability. Such capability must be reliable, robust and must easily respond to the physical and environmental constraints imposed by the aircraft environment. Highly multiplexed fibre optic Bragg grating sensors are assessed to meet this challenging en...
متن کاملDesign of FBG Demodulation System Based on Arrayed Waveguide Grating
Array waveguide grating(AWG) is a kind of role scattered light passive device base on the plane wave circuit technology. A broadband laser beam can be divided into multibeam laser light by wavelength. In this paper, the characteristics of AWG are used and based on previous studies. Using an array waveguide grating fiber Bragg grating (FBG) demodulation method, and the mathematical model of FBG ...
متن کامل