Performance Analysis of Microthrusters Based on Coupled Thermal-Fluid Modeling and Simulation
نویسندگان
چکیده
Gas flow and performance characteristics of a high-temperature micro-electronically machined systems (MEMS)-based thruster are studied using a coupled thermal-fluid analysis. The material thermal response governed by the transient-heat-conduction equation is obtained by the finite element method. The low–Reynolds number gas flow in the microthruster is modeled by the direct simulation Monte Carlo approach. The effects of Reynolds number, thermal boundary conditions, and micronozzle height are considered in detail. The predicted thrust and mass-discharge coefficient of the three-dimensional microthruster under different flow conditions decrease with time as the viscous losses increase for higher wall temperatures.
منابع مشابه
Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow
This paper deals with the hydrodynamic and thermal analysis of a new type of porous heat exchanger (PHE). This system operates based on energy conversion between gas enthalpy and thermal radiation. The proposed PHE has one high temperature (HT) and two heat recovery (HR1 and HR2) sections. In HT section, the enthalpy of flowing high temperature gas flow that is converted to thermal radiation em...
متن کاملNumerical Simulation and Parametric Reduced Order Modeling of the Natural Convection of Water-Copper Nanofluid
In this article, a coupled computational framework is presented for the numerical simulation of mass transfer under the effects of natural convection phenomena in a field contains water-copper Nano-fluid. This CFD model is build up based on accurate algorithms for spatial derivatives and time integration. The spatial derivatives have been calculated using first order upwind and second order cen...
متن کاملOptimization of Fan Geometry for Urban Train Traction Motors using Coupled Numerical Electromagnetic and Thermal Analysis
One of the most important parameters in designing electrical motors is heat generation by the motor and the way it is dissipated. Temperature rising reduce efficiency and reliability of traction motors and leads to failure. In this paper, an urban train traction motor in a 3D computational fluid dynamics (CFD) simulation has been investigated. Maxwell software for electromagnetic simulation and...
متن کاملA Coupled Rigid-viscoplastic Numerical Modeling for Evaluating Effects of Shoulder Geometry on Friction Stir-welded Aluminum Alloys
Shoulder geometry of tool plays an important role in friction-stir welding because it controls thermal interactions and heat generation. This work is proposed and developed a coupled rigid-viscoplastic numerical modeling based on computational fluid dynamics and finite element calculations aiming to understand these interactions. Model solves mass conservation, momentum, and energy equations in...
متن کاملComputational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels
In the study, the thermal-hydraulic performance of the zigzag channels with circular cross-section was analyzed by Computational Fluid Dynamics (CFD). The standard K-Ꜫ turbulent scalable wall functions were used for modeling. The wall temperature was assumed constant 353 K and water was used as the working fluid. The zigzag serpentine channels with bend angles of 5 - 45° were studied for turbul...
متن کامل