A set of decentralized PID controllers for an n – link robot manipulator
نویسنده
چکیده
A class of stabilizing decentralized proportional integral derivative (PID) controllers for an n-link robot manipulator system is proposed. The range of decentralized PID controller parameters for an n-link robot manipulator is obtained using Kharitonov theorem and stability boundary equations. Basically, the proposed design technique is based on the gain-phase margin tester and Kharitonov’s theorem that synthesizes a set of PID controllers for the linear model while nonlinear interaction terms involve in system dynamics are treated as zero. The stability analysis of the composite system with the designed set of decentralized PID controllers is investigated by incorporating bounding parameters of interconnection terms in LMI formulation. From the range of controller gains obtained by the proposed method, a genetic algorithm is adopted to get an optimal controller gains so that the tracking error is minimum. Simulation results are shown to demonstrate the applicability of the proposed control scheme for solution of fixed as well as time-varying trajectory tracking control problems.
منابع مشابه
ANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کاملDynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...
متن کاملModeling Flexibility Effects in Robotic Arms Via the Modified 4x4 D-H Homogeneous Transformation
This paper presents a method for the kinematical modeling of robot manipulator arms with flexible members. Development of such techniques are important for the improvement of robotic arms precision performance and their mechanical design. The approach employs the (4X4) Denavit-Hartenberg homogeneous transformations to describe the kinematics of light weight flexible manipulator arms. The method...
متن کاملBoundary Feedback Stabilization of a Nonlinear Flexible Gantry Manipulator Using Disturbance Observer
This paper aims to develop a boundary control solution for a single-link gantry robot manipulator with one axis of rotation. The control procedure is considered with link’s transverse vibrations while system undergoes rigid body nonlinear large rotation and translation. Initially, based on Hamilton principle, governing equations of hybrid motions as a set of partial differential equations...
متن کاملTrajectory Control of Two Link Robotic Manipulator Using Pid
This paper presents the design and implementation of PID controller for the general form of two-link planar robotic manipulator. Also for comparative analysis, proportional-derivative (PD), is implemented on the same system under same conditions. The comparative analysis of the results demonstrates that the PID controller is best among all the conventional controllers and the simulation results...
متن کامل