An investigation of non-planar austenite–martensite interfaces
نویسنده
چکیده
Motivated by experimental observations on CuAlNi single crystals, we present a theoretical investigation of non-planar austenite-martensite interfaces. Our analysis is based on the nonlinear elasticity model for martensitic transformations and we show that, under suitable assumptions on the lattice parameters, non-planar interfaces are possible, in particular for transitions with cubic austenite.
منابع مشابه
The Effect of Nitrogen on Martensite Formation in a Cr-Mn-Ni Stainless Steel
The influence of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe-17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully austenitic at room temperature; those containing less nitrogen consist of a mixture of austenite, martensite and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are m...
متن کاملInvestigation of the martensitic transformation and the damping behavior of a superelastic Ti-Ta-Nb alloy
In this study the α′′ stress-induced martensitic transformation and damping behaviour of the superelastic β-Ti–25Ta–25Nb alloy are investigated by tensile tests at room temperature and by dynamic mechanical analysis (DMA) in tensile mode for different applied stresses. Tensile tests show a fully non-linear elastic domain and, consequently, a specific method is proposed to determine the elastic ...
متن کاملNucleation and Growth of the Ni5Al3 Phase in Ni-Al Austenite and Martensite
The nucleation and growth mechanisms of Ni5A13 precipitates and microtwinned plates in B2 austenite and 2M (3R) martensite phases are described on the basis of conventional and high resolution electron microscopy. In the Ni62.5A137.5 B2 austenite matrix short annealings at 550°C introduce three-pointed star shaped precipitates consisting of twin related parts of different variants of the Ni5A13...
متن کاملInvestigation of Parent Austenite Grains from Martensite Structure Using EBSD in a Wear Resistant Steel
Crystallographic reconstruction of parent austenite grain boundaries from the martensitic microstructure in a wear resistant steel was carried out using electron backscattered diffraction (EBSD). The present study mainly aims to investigate the parent austenite grains from the martensitic structure in an as-rolled (reference) steel sample and samples obtained by quenching at different cooling r...
متن کاملDynamic elastic properties and magnetic susceptibility across the austenite-martensite transformation in site-disordered ferromagnetic Ni-Fe-Al alloy
Besides permitting an accurate determination of the ferromagnetic-to-paramagnetic phase transition temperature and the characteristic temperatures for the beginning and end of the growth of martensite (austenite) phase at the expense of austenite (martensite) phase while cooling (heating), the results of an extensive ac susceptibility, sound velocity and internal friction investigation of the t...
متن کامل