Miniaturization of Wilkinson Power Dividers by Using Defected Ground Structures

نویسندگان

  • H. Oraizi
  • M. S. Esfahlan
چکیده

It is proposed that the application of defected ground structures (DGS) and electromagnetic bandgap (EBG) reduce the phase velocity, increase effective permittivity of microstrips and reduce the effective the wavelength which eventually lead to the reduction of overall length of Wilkinson power dividers. Furthermore, the adjacent strip lines may approach each other, which cause coupling problems. The undesired coupling maybe cancelled by connecting a capacitance in parallel with the isolation resistor of Wilkinson power divider. Application of DGS and EBG will not only reduce the dimensions of the divider, but also improves its scattering parameters.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Using a VIA-Less CRLH Transmission Line to Design Compact Wilkinson Power Dividers and Rat-Race Couplers

A method for design and implementation of a compact via-less Composite Right/Left-Handed Transmission Line (CRLH TL) is presented. By introducing a new circuit model, the CRLH transmission line behavior is studied versus the parameters variations to achieve the desired characteristic impedance and electrical length. Then a compact quarter wavelength CRLH transmission line with 70 Ω characte...

متن کامل

A Power Divider with Adjustable Dividing Ratio

An unequal Wilkinson power divider with adjustable power dividing ratio is proposed. The proposed power divider consists of rectangular defected ground structure (DGS), isolated island in DGS, and varactor diodes. The impedance of the microstrip line greatly increases due to the DGS, and varies because of the varying capacitance of diodes. The measured unequal dividing ratios vary from 1.97–13....

متن کامل

Design of a Two Octave Gysel Power-Divider Using DGS and DMS

This paper proposes a two way L and S band Gysel power divider/combiner that uses line to ground resistors. Step by step methods to obtain a wide isolation and transmission bandwidth are presented. A design that uses five resistors is selected and optimized based on Quasi Newton method. Then the Defected Microstrip Structure (DMS) and Defected Ground Structure (DGS) is used to obtain better tra...

متن کامل

A Miniaturized Wilkinson Power Divider Using Dgs and Fractal Structure for Gsm Application

This paper proposes a miniaturization method for conventional Wilkinson Power Divider(WPD) by replacing the quarter wave sections with the help of fractals. The performance degradation is compensated by using Defected Ground Structure (DGS). The resultant device occupies 56% of the area in comparison to the conventional WPD. The simulation results show a reflection coefficient of −66.98 dB and ...

متن کامل

A Triangular Wilkinson Power Divider with Spaced Output Ports

This paper proposes an idea to modify the conventional Wilkinson power dividers to have physically spaced output ports. The well-known internal resistor of Wilkinson power divider is now connected to output ports by two additional transmission lines to create a triangular shape power divider. Several modified power dividers are designed at frequency of 1.0 GHz and one of them is fabricated and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008