Configuration of Aerosol Delivery Devices and Their Placement: Let's Be Sure We're Paying Attention to the Literature.

In this issue of RESPIRATORY CARE, Ball and colleagues1 determined the optimal nebulizer configurations and positions for aerosol delivery in vitro with and without CPAP. They determined that with continuous high-flow CPAP, the greatest amount of albuterol delivered to a lung simulator (13.8 4.4%) was when the nebulizer was placed proximal to the lung simulator. Without CPAP, they determined that the greatest amount of albuterol delivered to the lung simulator (9.9 1.1%) was with a T-piece with one extremity closed with a cap. Studies such as this are so important because practitioners may be complacent about the equipment setup and nebulizer position for delivering an aerosol to patients with or without mechanical ventilation, performing this therapy as they were shown by their clinical instructors or others, without regard for the actual aerosol delivery to the airways or outcome of the therapy as determined by careful patient assessment or by review of the literature on this topic. For instance, some practitioners may place the medication nebulizer in-line with a large volume air entrainment nebulizer. Unfortunately, the high flow of gas blows the medicated aerosol through the circuit such that virtually no medication reaches the patient. As therapists, we need to ensure that when we give an aerosol treatment, it’s not just because it was ordered, but rather with attention to whether the aerosol actually makes it to the airway, whether it is indicated, and whether we have assessed the patient before and after the treatment to see if it was effective. We have the tools and assessment skills to do this. We now know as the result of excellent research, both in vitro and in vivo, the correct placement of the nebulizer for spontaneously breathing patients with and without artificial airways,1,2 and we know that a mouthpiece is the preferred interface.2 We know the correct placement of the