Comparison of some theoretical models for fittings of the temperature dependence of the fundamental energy gap in GaAs
نویسندگان
چکیده
منابع مشابه
Characteristic of P-type AlAs/GaAs Bragg Mirrors Grown by MBE on (100) and (311)A Oriented Substrates
P-type GaAs/AlAs distributed Bragg mirrors have been grown using molecular beam epitaxy on (100) and (311)A GaAs substrates in a similar conditions. A comparison of I-V measurements shows that the resistance of the ungraded mirrors grown on the (311)A substrate is 35 times lower than those grown on the (100) substrate with similar structure. The effective barrier heights for both (311 )A and (1...
متن کاملEnergy Levels of InGaAs/GaAs Quantum Dot Lasers with Different Sizes
In this paper, we have studied the strain, band-edge, and energy levels of cubic InGaAs quantum dots (QDs) surrounded by GaAs. It is shown that overall strain value is larger in InGaAs-GaAs interfaces, as well as in smaller QDs. Also, it is proved that conduction and valence band-edges and electron-hole levels are size dependent; larger QD sizes appeared to result in the lower recombination...
متن کاملMagneto-Optical properties of GaP single crystal
The temperature dependence of magneto-optical and magneto-photoconductivity measurements were carried out in the range of (200-330) K. A home made optical cryostat was used for the measurements. The measured room temperature value of the energy gap was found to be 2.211 eV. The temperature coefficient of energy gap was found to be -5.48×10-4 eV/K obtained by the optical absorption method and -4...
متن کاملEffect of Temperature and Pressure on Correlation Energy in a Triplet State of a Two Electron Spherical Quantum Dot
The combined effect of hydrostatic pressure and temperature on correlation energy in a triplet state of two electron spherical quantum dot with square well potential is computed. The result is presented taking GaAs dot as an example. Our result shows the correlation energies are i)negative in the triplet state contrast to the singlet state ii) it increases with increase in pressure iii)further...
متن کاملThermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models
The loss of energy especially in industrial and residential buildings is one of the main reasons of increased energy consumption. Improving the thermal insulation properties of materials is a fundamental method for reducing the energy losses. Polymeric foams are introduced as materials with excellent thermal insulation properties for this purpose. In the present study, a deep theoretical invest...
متن کامل