MODELING OF A CYLINDRICAL APPLICATOR WITH THE TM01l MODE AND A SPHERICAL LOAD
نویسندگان
چکیده
The paper presents the results of 3D FDTD modeling of a 915 MHz cylindrical structure with a spherical load (fruit). Three different configurations of the loops exciting the TM01l mode are analyzed. The coupling is shown not to be sensitive to the load’s temperature and to the type of the fruit.
منابع مشابه
COUPLING AND POWER DISSIPATION IN A COAXIALLY EXCITED TM01l MODE CYLINDRICAL APPLICATOR WITH A SPHERICAL LOAD
This paper presents the results of 3D FDTD modeling of a 915-MHz cylindrical structure with the TM01l mode excited by a coaxial line and intended for thermal processing of a spherical load (a fruit). Energy coupling is shown to be insensitive to the fruit’s type and temperature, but dependent on its size and location and the loop’s radius. The patterns of dissipated power are analyzed from the ...
متن کاملEffect of shell axial deformation on flutter of cantilevered cylindrical shells under follower forces
Axial vibration effect of shell particles on dynamic stability of a cantilevered cylindrical shell under an axial follower force was addressed. In spite of free-ended shells, the reduced axial force under this effect cannot be derived analytically. Instead, an approximate method was proposed based on the fact that the static (and harmonic) axial deformation under an axial load in a free-ended b...
متن کاملRobust Sliding Mode Controller for Trajectory Tracking and Attitude Control of a Nonholonomic Spherical Mobile Robot
Based on dynamic modeling, robust trajectory tracking control of attitude and position of a spherical mobile robot is proposed. In this paper, the spherical robot is composed of a spherical shell and three independent rotors which act as the inner driver mechanism. Owing to rolling without slipping assumption, the robot is subjected to two nonholonomic constraints. The state space representatio...
متن کاملModelling of Random Geometrical Imperfections and Reliability Calculations for Thin Cylindrical Shell Subjected to Lateral Pressure
It is well known that it is very difficult to manufacture perfect thin cylindrical shell. Initial geometrical imperfections existing in the shell structure is one of the main determining factor for load bearing capacity of thin cylindrical shell under uniform lateral pressure. As these imperfections are random, the strength of same size cylindrical shell will also random and a statistical metho...
متن کاملDynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation
The fundamental frequencies and mode shapes of steel and carbon fiber–reinforced plastic (CFRP) cylindrical shells with steel inserts were investigated using finite element analysis and modal testing. The free-free boundary condition was tested with modal testing using the roving hammer method and verified by finite element analysis using ABAQUS. The results show good agreement between the test...
متن کامل