Active Damping and Vibration Control for Aircraft Fin and Appendage Structures
نویسندگان
چکیده
Numerous vibration control techniques, employing both passive and active methods, have been developed and tested over the last several decades. Some of these techniques are in widespread use, while others have rarely or never left the laboratory. This paper considers the value that vibration damping and control of aircraft fins and appendage structures can have in reducing loads and subsequent fatigue and possible failure. These structures often are subject to high loads resulting from wakes of upstream external stores. The vibration control methods were considered as part of a larger study focused on active flow control. The options for passive or active vibration control on a class of fin-type structures are reviewed, and one approach – active and passive damping using piezoelectric materials – is covered in greater detail. Piezoelectric transducer sizing for expected pressure loading and modeling of piezoelectric-based active damping control systems are discussed. Motivation for another possible techniques coupling active flow and vibration control is presented using arguments from adaptive filtering and feedforward control. Results are presented for bench tests with simulated disturbances, for low speed wind tunnel tests, and for high speed wind tunnel tests.
منابع مشابه
Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE)
Landing impact and runway unevenness have proximate consequence on performance of landing gear system and conduce to discomfort of passengers and reduction of the pilot’s capability to control aircraft. Finally, vibrations caused by them result in structure fatigue. Fuzzy logic controller is used frequently in different applications because of simplicity in design and implementation. In the pre...
متن کاملMathematical Model and Vibration Analysis of Aircraft with Active Landing Gear System using Linear Quadratic Regulator Technique
This paper deals with the study and comparison of passive and active landing gear system of the aircraft and dynamic responses due to runway irregularities while the aircraft is taxying. The dynamic load and vibration caused by the unevenness of runway will result in airframe fatigue, discomfort of passengers and the reduction of the pilot’s ability to control the aircraft. One of the objectiv...
متن کاملSemi-Active Pulse-Switching SSDC Vibration Suppression using Magnetostrictive Materials
One of the best vibration control methods using smart actuators are semi-active approaches which are as strong as active methods and need no external energy supply such as passive ones. Compared with piezoelectric-based, magnetostrictive-based control methods have higher coupling efficiency, higher Curie temperature, higher flexibility to be integrated with curved structures and no depolarizati...
متن کاملA Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads
The present work demonstrates the successful application of a simple active vibration control procedure based on structural dynamics. Based on mathematical and structural dynamics’ theories, the appropriate locations of sensor and actuator locations of the smart structure are predicted. Also, the optimum value of actuator force which controls the structural vibrations as quickly as it is possib...
متن کاملField Programmable Gate Array Implementation of Active Control Laws for Multi-mode Vibration Damping
This paper investigate the possibility and effectiveness of multi-mode vibration control of a plate through real-time FPGA (Field Programmable Gate Array) implementation. This type of embedded system offers true parallel and high throughput computation abilities. The control object is an aluminum panel, clamped to a Perspex box’s upper side. Two types of control laws are studied. The first belo...
متن کامل