Isolated Bidirectional DC–DC Converter for SuperCapacitor Applications
نویسندگان
چکیده
This paper proposes a new bidirectional DC/DC converter for supercapacitor applications. The proposed converter has a parallel structure in supercapacitor side (where voltage is low and current is high) and a series structure in the other side. This structure increases efficiency of the converter. For current sharing in the parallel side of the proposed converter, two different methods are recommended and compared in this paper: Current balancing transformer (CBT) and two separate inductors (TSI). Simulation and experimental results show performance of the proposed converter.
منابع مشابه
A Bidirectional DC-DC Convreter with Zero Voltage Switching Capability for Energy Storage Application
In this paper, a bidirectional DC-DC converter with high power density for energy storage application is proposed. The presented converter provides power transfer in both directions only with adjusting phase shift angle. Zero voltage switching (ZVS) in both turn on and turn off moments of all switches is the major capability of the converter that makes it suitable for high power applications. Z...
متن کاملIsolated Bidirectional DC-DC Converter for Hybrid Electric Vehicle Applications
Hybrid electric vehicles (HEVs) offer many advantages, such as high fuel economy, low emissions, and silent operation. In HEVs, there are two or more different voltage buses for different purposes of the vehicle operation. There are needs of galvanically isolated bidirectional DC-DC converter to link different DC voltage bus and transfer energy back and forth. For example, on of the DC-DC conve...
متن کاملAn Isolated Three-Port Bidirectional DC-DC Converter with Enlarged ZVS Region for HESS Applications in DC Microgrids
In this paper, a two-stage three-port isolated bidirectional DC-DC converter (BDC) for hybrid energy storage system (HESS) applications in DC microgrids is proposed. It has an enlarged zero-voltage-switching (ZVS) region and reduced power circulation loss. A front-end three-phase interleaved BDC is introduced to the supercapacitor (SC) channel to compensate voltage variations of SC. Consequentl...
متن کاملA Non Isolated Bidirectional Dc-dc Converter with Soft Switching
Power electronic converter systems for applications such as telecom, automotive, and space can have dc voltage buses that are backed up with batteries or super-capacitors. These batteries or super-capacitors are connected to the buses with bidirectional dc–dc converters which allow them to discharged or charged, depending on the operating conditions. Bidirectional dc–dc converters may be isolat...
متن کاملSliding Mode Control of a Bidirectional Buck/Boost DC-DC Converter with Constant Switching Frequency
In this paper, sliding mode control (SMC) for a bidirectional buck/boost DC-DC converter (BDC) with constant frequency in continuous conduction mode (CCM) is discussed. Since the converter is a high-order converter, the reduced-order sliding manifold is exploited. Because of right-half-plan zero (RHPZ) in the converter’s duty ratio to output voltage transfer function, sliding mode current...
متن کامل