Integrated Equivalent Circuit and Thermal Model for Simulation of Temperature-Dependent LiFePO4 Battery in Actual Embedded Application
نویسندگان
چکیده
Zuchang Gao 1, Cheng Siong Chin 2,*, Wai Lok Woo 3 and Junbo Jia 1 1 School of Engineering, Temasek Polytechnic, 21 Tampines Avenue 1, Singapore 529757, Singapore; [email protected] (Z.G.); [email protected] (J.J.) 2 School of Marine Science and Technology, Newcastle University, Newcastle upon Tyne NE1 7RU, UK 3 School of Electrical and Electronic Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK; [email protected] * Correspondence: [email protected]; Tel.: +44-65-6908-6013
منابع مشابه
Parameterization and Validation of an Integrated Electro-thermal Lfp Battery Model
In this paper the parameterization of an integrated electrothermal model for an A123 26650 LiFePO4 battery is presented. The electrical dynamics of the cell are described by an equivalent circuit model. The resistances and capacitances of the equivalent circuit model are identified at different temperatures and SOC’s, for charging and discharging. Functions are chosen to characterize the fitted...
متن کاملParameterization and Validation of an Integrated Electro-thermal Cylindrical Lfp Battery Model
In this paper, for the first time, an equivalent circuit electrical model is integrated with a two-state thermal model to form an electro-thermal model for cylindrical lithium ion batteries. The parameterization of such model for an A123 26650 LiFePO4 cylindrical battery is presented. The resistances and capacitances of the equivalent circuit model are identified at different temperatures and s...
متن کاملLarge Lithium Polymer Battery Modeling for the Simulation of Hybrid Electric Vehicles Using the Equivalent Circuit Method
In the present study, a model of a large Lithium Polymer (Li-Po) battery for use in the simulation of Hybrid Electric Vehicles (HEVs) is developed. To attain this goal, an Equivalent Circuit (EC) consisting of a series resistor and two RC parallel networks is considered. The accuracy and the response time of the model for use in an HEV simulator are studied. The battery parameters identifica...
متن کاملImproved nanofluid cooling of cylindrical lithium ion battery pack in charge/discharge operation using wavy/stair channels and copper sheath
Abstract: In order to improve the thermal management system for cooling an electric vehicle battery pack, the thermal performance of the battery pack in two states of charge and discharge in different working conditions by using a copper sheath around the batteries and a copper sheath, as well as a stair channel on top of the battery pack and using of nanofluid as cooling fluid, has been studie...
متن کاملOnline Estimation of Model Parameters and State of Charge of LiFePO4 Batteries Using a Novel Open-Circuit Voltage at Various Ambient Temperatures
This study describes an online estimation of the model parameters and state of charge (SOC) of lithium iron phosphate batteries in electric vehicles. A widely used SOC estimator is based on the dynamic battery model with predeterminate parameters. However, model parameter variances that follow with their varied operation temperatures can result in errors in estimating battery SOC. To address th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017