Austenite films in bainitic microstructures
نویسندگان
چکیده
Bainitic microstructures in which fine platelets offerrite are intimately mixed with films of austenite are known to exhibit good combinations of strength and toughness. It isfound that the thickness of these austenitefilms can be estimated by assuming that the carbon diffusion field around an existing plate offerrite prevents the close approach of another parallel plate. This is because the regions of austenite with the highest carbon concentration are unable to transform to bainite. MST/3052
منابع مشابه
High-Strength Bainitic Steels
With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...
متن کاملStrong Bainitic Steels by Continuous Cooling Transformation
Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...
متن کاملThermal Stability of Retained Austenite in Bainitic Steel: an in situ study
The tempering of two–phase mixtures of bainitic ferrite and carbon–enriched retained austenite has been investigated in an effort to separate the reactions that occur at elevated temperatures from any transformation during cooling to ambient conditions. It is demonstrated using synchrotron X–radiation measurements, that the residue of austenite left at the tempering temperature partly decompose...
متن کاملRolling Contact Fatigue Performances of Carburized and High-C Nanostructured Bainitic Steels
In the present work, the nanostructured bainitic microstructures were obtained at the surfaces of a carburized steel and a high-C steel. The rolling contact fatigue (RCF) performances of the two alloy steels with the same volume fraction of undissolved carbide were studied under lubrication. Results show that the RCF life of the carburized nanostructured bainitic steel is superior to that of th...
متن کاملMicrostructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel
In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...
متن کامل