Posidonia oceanica as a Renewable Lignocellulosic Biomass for the Synthesis of Cellulose Acetate and Glycidyl Methacrylate Grafted Cellulose
نویسندگان
چکیده
High-grade cellulose (97% α-cellulose content) of 48% crystallinity index was extracted from the renewable marine biomass waste Posidonia oceanica using H₂O₂ and organic peracids following an environmentally friendly and chlorine-free process. This cellulose appeared as a new high-grade cellulose of waste origin quite similar to the high-grade cellulose extracted from more noble starting materials like wood and cotton linters. The benefits of α-cellulose recovery from P. oceanica were enhanced by its transformation into cellulose acetate CA and cellulose derivative GMA-C. Fully acetylated CA was prepared by conventional acetylation method and easily transformed into a transparent film. GMA-C with a molar substitution (MS) of 0.72 was produced by quenching Fenton's reagent (H₂O₂/FeSO₄) generated cellulose radicals with GMA. GMA grafting endowed high-grade cellulose from Posidonia with adsorption capability. GMA-C removes β-naphthol from water with an efficiency of 47%, as measured by UV-Vis spectroscopy. After hydrolysis of the glycidyl group to glycerol group, the modified GMA-C was able to remove p-nitrophenol from water with an efficiency of 92%, as measured by UV-Vis spectroscopy. α-cellulose and GMA-Cs from Posidonia waste can be considered as new materials of potential industrial and environmental interest.
منابع مشابه
Activator Generated Electron Transfer Combined Atom Transfer Radical Polymerization (AGET-ATRP) for Controlled Grafting Location of Glycidyl Methacrylate on Regenerated Cellulose Ultrafiltration Membranes
This investigation indicates the ability to selectively graft glycidyl methacrylate (GMA) only from the external surface of regenerated cellulose (RC) ultrafiltration (UF) membranes using activator generated electron transfer (AGET) atom transfer radical polymerization (ATRP). This controlled polymerization resulted in epoxy functionalized polymer brush ends. Further reaction of the terminal ep...
متن کاملSimple chemical transformation of lignocellulosic biomass into furans for fuels and chemicals.
Lignocellulosic biomass is a plentiful and renewable resource for fuels and chemicals. Despite this potential, nearly all renewable fuels and chemicals are now produced from edible resources, such as starch, sugars, and oils; the challenges imposed by notoriously recalcitrant and heterogeneous lignocellulosic feedstocks have made their production from nonfood biomass inefficient and uneconomica...
متن کاملSeparation of Chromium (vi) from Aqueous Solutions by Cellulose Modified with D-glucose and Quaternary Ammonium Groups
A novel method for D-glucose (D-Glu) and trimethylammonium chloride immobilization onto the surface of cellulose powder was studied. Cellulose powder was grafted with vinyl monomer glycidyl methacrylate (GMA), using ceric ammonium nitrate as an initiator, and further derived with quaternary ammonium groups to build the D-GluN-type cellulose absorbent (Cell-g-GMA-D-GluN). Epoxy cellulose was fou...
متن کاملFunctionalized Polymers from Lignocellulosic Biomass: State of the Art
Since the realization that global sustainability depends on renewable sources of materials and energy, there has been an ever-increasing need to develop bio-based polymers that are able to replace petroleum-based polymers. Research in this field has shown strong potential in generating high-performance functionalized polymers from plant biomass. With the anticipated large-scale production of li...
متن کاملSynthesis of cellulose acetate nanofibers and its application in the release of some drugs
Objective(s): The purpose of this study was to compare novel sandwich-structured nanofibrous membranes, and coaxial and usual methods, to provide sustained-release delivery of morphine for drug delivery. In this work, synthesis ofnanofibrous cellulose acetate (NFC) was carried out by electrospinning. Methods: A weighed amount of cellulose acetate (CA) pow...
متن کامل