Using Repetitive Control to Eliminate Periodic Disturbances in Damper Test Rigs
نویسندگان
چکیده
Repetitive Control is a relatively new technique for controlling systems that contain periodic reference signals or periodic disturbances. The fundamental idea behind the method is to use the internal model of the periodic signal to guarantee asymptotic reference tracking or disturbance rejection. In this paper two recent Repetitive Control algorithms are applied to a simulation model of a damper test rig. Damper test rigs are are widely used in the automotive industry to experimentally verify the mechanical durability properties of a given damper. These rigs, however, due to their mechanical setup, a tendency to generate internal periodic disturbances, which obviously have a negative effect on the reliability of the test results. The theoretical and simulation results in this paper show how Repetitive Control can be used to eliminate these periodic disturbances, resulting in a considerable increase in accuracy. Copyright © 2005 IFAC
منابع مشابه
Quasi-sliding mode based repetitive control for nonlinear continuous-time systems with rejection of periodic disturbances
A Quasi-Sliding Mode (QSM) based tracking control method for tackling Multiple-Input Multiple-Output (MIMO) nonlinear continuous-time systems with un-matching system uncertainties and exogenous disturbances is proposed. The presented Repetitive Control (RC) scheme ensures robust system stability when the system is subject to non-periodic uncertainties and exogenous disturbances. The complete re...
متن کاملSystem Identification from Multiple-trial Data Corrupted by Non-repeating Periodic Disturbances
Iterative learning and repetitive control aim to eliminate the effect of unwanted disturbances over repeated trials or cycles. The disturbance-free system model, if known, can be used in a model-based iterative learning or repetitive control system to eliminate the unwanted disturbances. In the case of periodic disturbances, although the unknown disturbance frequencies may be the same from tria...
متن کاملRepetitive control mechanism of disturbance rejection using basis function feedback with fuzzy regression approach
Applying a repetitive control mechanism to eliminate disturbances in a mechanical control system has been an important subject of investigation. This paper presents a fuzzy theorem approach for the repetitive control law using basis functions feedback. The law adjusted the command given a feedback control system in order to eliminate tracking errors because of a periodic disturbance. This perio...
متن کاملSubspace Predictive Repetitive Control with Lifted Domain Identification for Wind Turbine Individual Pitch Control ⋆
Individual pitch control (IPC) is gaining increasing acceptance as a method for mitigation of periodic disturbances in wind turbines. This paper aims at formulating a repetitive control (RC) methodology capable of adapting online to changing turbine dynamics. This is achieved by performing system identification in a reduced-dimensional space using basis functions and using the identified parame...
متن کاملObserver-based Predictive Repetitive Control with Experimental Validations
This paper develops a new design method for predictive repetitive control systems to track periodic reference signals or reject disturbances with bandlimited frequency content. In the presence of input disturbances acting on the system, the new design estimates these disturbances using an observer. This approach is complementary to the predictive repetitive control system designs previously rep...
متن کامل