A Systematic Approach for the Design of Ladder Based Switched Current Bandpass Filter
نویسندگان
چکیده
A systematic approach for the design of Switched Current (SI) ladder filters is described. The specifications of the filter in z-domain are used to obtain continued fraction expansions (CFE). Signal Flow Graphs (SFG) of each row of the expansion is derived and then these SFG are directly transformed into switched current structures (integrators and amplifiers). The SI blocks thus obtained are connected in ladder form to generate the required SI filter circuit. This approach can be used for all filter types. A second order bandpass filter is used to demonstrate the utility of the approach. Key-Words: Switched current circuits, continued fraction expansion, ladder filter, and cascode circuits.
منابع مشابه
Fractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note)
In this study, a fractal, Y-shaped dual-mode resonator bandpass filter (BPF) with input-output cross-coupling is introduced. A parallel-coupling feed structure with a cross coupling has been used to generate two transmission zeroes (TZs) near the lower and upper cutoff frequency that can effectively improve the passband edge selectivity. Also, a fractal shaped based on conventional diamond and ...
متن کاملA Novel Structure for Realization of a Pseudo Two Path Band-Pass Filter
In this paper, a modified auto zeroed integrator is used to design and simulate a low-voltage high-Q switched capacitor pseudo 2-path filter. The filter is a sixth–order Chebyshev band-pass filter operating at sampling frequency of 1MHz and center frequency of 250 kHz with a quality factor of 50. The proposed filter has both low-voltage and high speed properties of the auto zeroed integrators ...
متن کاملA Compact Wide Bandpass Filter based on Substrate Integrated Waveguide (SIW) Structure
In this pare, a wideband three-order bandpass filter (BPF) is proposed. The proposed wideband filter is designed using the substrate integrated waveguide (SIW) structure by loading T-shape slots. A BPF with two resonators is formed by etching T-shape slots with different size on the top metal plane of the SIW structure. The filter is investigated with the theory of coupled resonator circuits. T...
متن کاملA Sub-µW Tuneable Switched-Capacitor Amplifier-Filter for Neural Recording Using a Class-C Inverter
A two stage sub-µW Inverter-based switched-capacitor amplifier-filter is presented which is capable of amplifying both spikes and local field potentials (LFP) signals. Here we employ a switched capacitor technique for frequency tuning and reducing of 1/f noise of two stages. The reduction of power consumption is very necessary for neural recording devices however, in switched capacitor (SC) cir...
متن کاملActive Power Filter Design by a Novel Approach of Multi-Objective Optimization
This paper presents an innovative active power filter design method to simultaneously compensate the current harmonics and reactive power of a nonlinear load. The power filter integrates a passive power filter which is a RL low-pass filter placed in series with the load, and an active power filter which comprises an RL in series with an IGBT based voltage source converter. The filter is assumed...
متن کامل