Martensitic Transformation Under Loading and the Mechanical Properties of Iron Alloys
نویسنده
چکیده
The ma~tensitic transfol-niation (MT) under tensile dcfol.m:ltion at 77K i n a series of FeNi-Mn alloys was studied. The anlotult of ~na~tensite fos~ned d ~ ~ r i ~ l g the tensile test depends on the applied stress and on the Mn content which determines the mnrtensitic point and the MT start stress. Elongation of the tensile tested samples has a maximum value in the alloys co~ltainilig the 50% anlount of maltensite fosn~ed during the tensile test. Paramete~r; which determine the inte~~sity of the MT and plasticity of the samples under loading are discussed.
منابع مشابه
Structural and Mechanical Characterization of Austempered Cu - Sn Ductile Iron Alloys
The effect of heat treatment and alloying elements of copper and tin on the microstructure and mechanical properties of austempered ductile cast iron alloys is investigated. The austenitizing temperature of 890°C, the isothermal transformation (austempering) temperatures of 285, 335 and 375°C, and austempering times of 15, 30, 75 and 150 minutes are studied. The alloying elements of copper and ...
متن کاملReversible Martensitic Transformation under Low Magnetic Fields in Magnetic Shape Memory Alloys
Magnetic field-induced, reversible martensitic transformations in NiCoMnIn meta-magnetic shape memory alloys were studied under constant and varying mechanical loads to understand the role of coupled magneto-mechanical loading on the transformation characteristics and the magnetic field levels required for reversible phase transformations. The samples with two distinct microstructures were test...
متن کاملThe effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel
Cryogenic treatment can be used as a supplemental treatment that is performed on some tool steels between quenching and tempering as an effective method for decreasing retained austenite and increasing wear resistance. In this research, the effect of deep cryogenic treatment (DCT) on dimensional stability and mechanical properties of 80CrMo12 5 tool steel was investigated. The martensitic trans...
متن کاملTransformation-Induced Creep and Creep Recovery of Shape Memory Alloy
If the shape memory alloy is subjected to the subloop loading under the stress-controlled condition, creep and creep recovery can appear based on the martensitic transformation. In the design of shape memory alloy elements, these deformation properties are important since the deflection of shape memory alloy elements can change under constant stress. The conditions for the progress of the marte...
متن کاملKinetics of martensitic transformations in magnetic field or under hydrostatic pressure.
We have recently constructed a phenomenological theory that provides a unified explanation for athermal and isothermal martensitic transformation processes. On the basis of this theory, we predict some properties of martensitic transformation and confirm them experimentally using some Fe-based alloys and a Ni-Co-Mn-In magnetic shape memory alloy.
متن کامل