3D Dynamic Modelling and Simulation of a Golf Drive
نویسندگان
چکیده
A validated dynamic model of a golf driver can be an invaluable asset in designing a well performing club. We present a model for simulating the golf drive that includes experimentally-measured inputs from actual golfers, and a three-dimensional (3D) flexible shaft model based on Rayleigh beam theory. The result is a computationally-efficient dynamic model that includes the “signature” of an individual’s swing, and the bending and torsion that is so important to the performance of the club. Good agreement was obtained between the simulated and experimental results. © 2009 Published by Elsevier Ltd.
منابع مشابه
Investigation of SLIM Dynamic Models Based on Vector Control for Railway Applications
Although, Single-Sided Linear Induction Motor (SLIM) utilization has increased in railway applications due to their numerous advantages in comparison to Rotational Induction Motors (RIM), there are some sophistication in their mathematical models and electrical drive. This paper focuses on the problems of SLIM modeling, with assuming end-effect on the basis of Field Oriented Control (FOC) as a ...
متن کاملToward a methodological framework for agent-based modelling and simulation of supply chains in a mass customization context
In a dynamic customer-centric supply chain context, classic forecasting models turn out to have a limited applicability. In order to estimate the key performance indices of these Supply Chains and to facilitate their management, it is necessary to use more elaborate tools such as a simulation. However building simulation of customer-centric supply chains is no trivial matter. It requires the el...
متن کاملNew Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell
In this study, a more accurate model of fuel cell of molten carbonate was also used that was determined input and output control variables and investigated the behavior of the system with respect to those variables. A more complete kinetic is also implemented for increasing the effectiveness of the presented paper. The input variables include fuel flow rate of cell which is methane and cell vol...
متن کاملExperimental and 3D Finite Element Analysis of a Slotless Air-Cored Axial Flux PMSG for Wind Turbine Application
In this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3D finite element modeling and experimental tests. The structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...
متن کاملBiomechanical Modelling of a Golf Swing by Means of the Multibody-Kinetics Software "ADAMS"
Previous double pendulum models of the golf swing could have included some over-simplifications (only two model segments, 2D analysis of 3D motion, rotation around a fixed pivot point). This has been overcome by full-body models driven by motion capture data from real swings. However, information regarding the validity of these models is still limited. Therefore, the aim of this study was to cr...
متن کامل