The effect of phagocytosis of poly(L-lactic acid) fragments on cellular morphology and viability.

نویسندگان

  • K H Lam
  • J M Schakenraad
  • H Esselbrugge
  • J Feijen
  • P Nieuwenhuis
چکیده

The aim of this study was to investigate the effect of phagocytosed poly(L-lactic acid) particles on the morphology and viability of phagocytes, mainly macrophages. Therefore, predegraded poly(L-lactic acid) (P-PLLA) and nontreated PLLA (N-PLLA) particles, both having diameters not exceeding 38 microns, were injected intraperitoneally in mice. P-PLLA particles were obtained by 25 kGy gamma-irradiation of N-PLLA particles. N-PLLA and P-PLLA particles were injected using an 0.3% ethanol/0.9% saline solution intraperitoneally to the mice. We also studied the release of the absorbed ethanol as a possible model for the release of low molecular weight, potentially toxic products. As control, nondegradable polytetrafluoroethylene (PTFE) particles and the carrier solution were used. After 1, 2, 3, 4, 5, and 7 days, the cells of the abdominal cavity were harvested to study the effect of phagocytosis of polymer particles on phagocytic cell morphology and viability. Studies with transmission electron microscopy indicated that, upon injection of particles in the peritoneal cavity, macrophages demonstrated signs of cell damage, cell death, and cell lysis due to phagocytosis of a large amount of P-PLLA particles. The morphology of the cells that had phagocytosed the N-PLLA and PTFE particles did not differ substantially from those of control animals in which only the solution was injected. Also, in the controls, hardly any cell death and no debris was observed. When the PLLA particles were injected as a suspension in a 0.3% ethanol/0.9% saline solution, no difference was observed between N-PLLA and P-PLLA. After phagocytosis, both cause cell damage, sometimes leading to cell death.(ABSTRACT TRUNCATED AT 250 WORDS)

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation into the effect of UV/Ozone Irradiation on the dyeing ‎behaviour of Poly(lactic acid) and Poly(ethylene terephthalate) ‎Substrates

The effect of UV/Ozone irradiation together with the pretreatments using distilled water, hydrogen peroxide, and hydrogen peroxide/sodium silicate solutions on the dyeing depth of the poly(lactic acid), PLA, and poly(ethylene terephthalate), PET, fabrics by the application of disperse dyes were investigated and the results were compared with that of untreated fabrics. The results showed that th...

متن کامل

Comparison of Proliferation and Osteoblast Differentiation of Marrow-Derived Mesenchymal Stem Cells on Nano- and Micro-Hydroxyapatite Contained Composite Scaffolds

Bones constructed by tissue engineering are being considered as valuable materials to be used for regeneration of large defects in natural bone. In an attempt to prepare a new bone construct, in this study, proliferation and bone differentiation of marrow-derived mesenchymal stem cells (MSCs) on our recently developed composite scaffolds of nano-, micro-hydroxyapatite/ poly(l-lactic acid) were ...

متن کامل

Nano-Structure Roughening on Poly(Lactic Acid)PLA Substrates: Scanning Electron Microscopy (SEM) Surface Morphology Characterization

Scanningelectron microscopy (SEM) has been utilized  to examine  the morphology and topography alterations  in the surface of Poly(Lactic Acid)(PLA) fabrics due to UV/Ozoneirradiation. In the past decade, a growing attention in the usage of “Green Techniques” in industrial applications has been observed owing to many benefits such as low impurities and their relatively low cost to substitute th...

متن کامل

Effect of different mass ratio of PLA: PEG segments in PLA-PEG-PLA copolymers on the physicochemical characterization and DNA release profile

Background: Adapting controlled release technologies to the delivery of DNA has the great potential to overcome extracellular barriers that limit gene delivery. This study investigates the effect of different mass ratio of PLA: PEG in the various tri block poly (lactic acid)-poly (ethylene glycol) - Poly (lactic acid) copolymer (PLA-PEG-PLA) on the properties of the resulting nanoparticles. Me...

متن کامل

Synthesis and characterization of nHA-PLA composite coating on stainless steel by dip-coating process for biomedical applications

316L stainless steel is the most commonly used metallic material in the manufacture of orthopedic implants. To achive better properties metal implants often coated with biocomposites. A sol–gel method was used for coating of Poly lactic acid (PLA)/Hydroxyapatite nanopowder (nHA) on stainless steel 316L substrate. The X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) wer...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Journal of biomedical materials research

دوره 27 12  شماره 

صفحات  -

تاریخ انتشار 1993