Magnetic alignment and patterning of cellulose fibers.

نویسندگان

  • Fumiko Kimura
  • Tsunehisa Kimura
چکیده

The alignment and patterning of cellulose fibers under magnetic fields are reported. Static and rotating magnetic fields were used to align cellulose fibers with sizes ranging from millimeter to nanometer sizes. Cellulose fibers of the millimeter order, which were prepared for papermaking, and much smaller fibers with micrometer to nanometer sizes prepared by the acid hydrolysis of larger ones underwent magnetic alignment. Under a rotating field, a uniaxial alignment of fibers was achieved. The alignment was successfully fixed by the photopolymerization of a UV-curable resin precursor used as matrix. A monodomain chiral nematic film was prepared from an aqueous suspension of nanofibers. Using a field modulator inserted in a homogeneous magnetic field, simultaneous alignment and patterning were achieved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Molecular orientation in dry and hydrated cellulose fibers: a coherent anti-Stokes Raman scattering microscopy study.

Coherent anti-Stokes Raman scattering (CARS) microscopy is combined with spontaneous Raman scattering microspectroscopy and second harmonic generation (SHG) microscopy to interrogate the molecular alignment in dry and hydrated cellulose fibers. Two types of cellulose were investigated: natural cellulose I in cotton fibers and regenerated cellulose II in rayon fibers. On the basis of the orienta...

متن کامل

Fabricating Unidirectional Magnetic Papers Using Permanent Magnets to Align Magnetic Nanoparticle Covered Natural Cellulose Fibers

This paper reports a simple innovative method to align magnetic cellulose fibers by using a simple permanent magnet to fabricate unidirectional magnetic papers. Magnetic cellulose fibers were made by in situ synthesis of magnetite nanoparticles on alpha cellulose pulp extracted from American southern pine. Scanning electron microscope micrographs and energy dispersive X-ray spectroscopy maps in...

متن کامل

Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures

© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim wileyonlinelibrary.com (1 of 10) 1604619 exiting the nozzle, is challenging. A viscoelastic response with a finite yield stress is required for filament patterning.[3] The shear-induced alignment of anisotropic building blocks, including carbon fibers,[4,5] silicon carbide whiskers,[5] alumina platelets,[3] and nanofibrillated cellulose (NFC)[6]...

متن کامل

Effects of Waste Fibers Stabilizers on the Draindown and Moisture Damage Sensitivity Properties of SMA Mixtures

Waste fibers produced from manufacturing processes are a byproduct commonly deposited in storing yards and/or landfills and thus results in many serious environmental problems in Iran. If these waste materials could be advantageously put to practical use in any application, it would reduce the burden on the environment and landfills. This paper compares the performance of the stone matrix aspha...

متن کامل

Producing Cellulose nanofiber from Cotton wastes by electrospinning method

One of the main issues of nanotechnology is producing materials with new properties. Nanotechnology, as a powerful tool, has the ability to create evolution in the agricultural system and food–medicinal industries across the world. Producing a high-performance material from reclaimed cellulose material will increase motivation to recycle these materials at all phases of paper production and rem...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Science and technology of advanced materials

دوره 9 2  شماره 

صفحات  -

تاریخ انتشار 2008