A Rapid Micromixer for Centrifugal Microfluidic Platforms

نویسندگان

  • Ziliang Cai
  • Jiwen Xiang
  • Hualing Chen
  • Wanjun Wang
چکیده

This paper presents an innovative mixing technology for centrifugal microfluidic platforms actuated using a specially designed flyball governor. The multilayer microfluidic disc was fabricated using a polydimethylsiloxane (PDMS) replica molding process with a soft lithography technique. The operational principle is based on the interaction between the elastic covering membrane and an actuator pin installed on the flyball governor system. The flyball governor was used as the transducer to convert the rotary motion into a reciprocating linear motion of the pin pressing against the covering membrane of the mixer chamber. When the rotation speed of the microfluidic disc was periodically altered, the mixing chamber was compressed and released accordingly. In this way, enhanced active mixing can be achieved with much better efficiency in comparison with diffusive mixing.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Biosensing enhancement of dengue virus using microballoon mixers on centrifugal microfluidic platforms.

Dengue is the current leading cause of death among children in several Latin American and Asian countries. Due to poverty in areas where the disease is prevalent and the high cost of conventional diagnostic systems, low cost devices are needed to reduce the burden caused by dengue infection. Centrifugal microfluidic platforms are an alternative solution to reduce costs and increase the availabi...

متن کامل

A Review of Biomedical Centrifugal Microfluidic Platforms

Centrifugal microfluidic or lab-on-a-disc platforms have many advantages over other microfluidic systems. These advantages include a minimal amount of instrumentation, the efficient removal of any disturbing bubbles or residual volumes, and inherently available density-based sample transportation and separation. Centrifugal microfluidic devices applied to biomedical analysis and point-of-care d...

متن کامل

The Effect of Contact Angles and Capillary Dimensions on the Burst Frequency of Super Hydrophilic and Hydrophilic Centrifugal Microfluidic Platforms, a CFD Study

This paper employs the volume of fluid (VOF) method to numerically investigate the effect of the width, height, and contact angles on burst frequencies of super hydrophilic and hydrophilic capillary valves in centrifugal microfluidic systems. Existing experimental results in the literature have been used to validate the implementation of the numerical method. The performance of capillary valves...

متن کامل

Coriolis-Induced Flow Control for Micro- and Nanofluidic Lab-on-a-Disk Technologies

This paper investigates how the Coriolis force can be user to control and pattern flow on a centrifugal microfluidic platform. This platform is composed of a drive unit resembling a standard CD player to spin a microstructured CD. The centrifugally driven flow on this CD is guided by microfluidic channel structures from inlet ports near the center towards the waste reservoirs on the outer perim...

متن کامل

Displacement Pumping of Liquids Radially Inward on Centrifugal Microfluidic Platforms in Motion

We describe two novel centrifugal microfluidic platform designs that enable passive pumping of liquids radially inward while the platform is in motion. The first design uses an immiscible liquid to displace an aqueous solution back towards the center of the platform, while the second design uses an arbitrary pumping liquid with a volume of air between it and the solution being pumped. Both desi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Micromachines

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2016